__ __ _____ _ _ _ _ __ _ _ \ \/ /___ _ __ |___ /| || | / | / | / _| ___/ / | \ // _ \ '_ \ |_ \| || |_ | |__| | | |_ / __| | | / \ __/ | | | ___) |__ _|| |__| |_| _| (__| | | /_/\_\___|_| |_| |____(_) |_|(_)_| |_(_)_| \___|_|_| (XEN) Xen version 3.4.1 (root@(none)) (gcc version 4.4.0 20090506 (Red Hat 4.4.0-4) (GCC) ) Tue Aug 11 22:49:05 EEST 200 9 (XEN) Latest ChangeSet: unavailable (XEN) Command line: dom0_mem=1024M loglvl=all guest_loglvl=all com1=19200,8n1 console=com1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009f400 (usable) (XEN) 000000000009f400 - 00000000000a0000 (reserved) (XEN) 00000000000f0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000007f6e0000 (usable) (XEN) 000000007f6e0000 - 000000007f6e3000 (ACPI NVS) (XEN) 000000007f6e3000 - 000000007f6f0000 (ACPI data) (XEN) 000000007f6f0000 - 000000007f700000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 0000000100000000 (reserved) (XEN) System RAM: 2038MB (2087420kB) (XEN) ACPI: RSDP 000F7B80, 0014 (r0 IntelR) (XEN) ACPI: RSDT 7F6E3040, 0030 (r1 IntelR AWRDACPI 42302E31 AWRD 0) (XEN) ACPI: FACP 7F6E30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0) (XEN) ACPI: DSDT 7F6E3180, 4085 (r1 INTELR AWRDACPI 1000 MSFT 100000E) (XEN) ACPI: FACS 7F6E0000, 0040 (XEN) ACPI: MCFG 7F6E7380, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0) (XEN) ACPI: APIC 7F6E7280, 0090 (r1 IntelR AWRDACPI 42302E31 AWRD 0) (XEN) NUMA turned off (XEN) Faking a node at 0000000000000000-000000007f6e0000 (XEN) Xen heap: 9MB (9800kB) (XEN) Domain heap initialised (XEN) found SMP MP-table at 000f3a50 (XEN) DMI 2.3 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x408 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0] (XEN) ACPI: wakeup_vec[7f6e000c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 15:3 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) (XEN) Processor #1 15:3 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: IOAPIC (id[0x05] address[0xfec84400] gsi_base[24]) (XEN) IOAPIC[1]: apic_id 5, version 32, address 0xfec84400, GSI 24-47 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Initializing CPU#0 (XEN) Detected 3000.209 MHz processor. (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K (XEN) CPU: L2 cache: 1024K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU0: Intel Extended MCE MSRs (12) available (XEN) Intel machine check reporting enabled on CPU#0. (XEN) CPU0: Thermal monitoring enabled (TM1) (XEN) CMCI: CPU0 has no CMCI support (XEN) CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04 (XEN) Booting processor 1/1 eip 8c000 (XEN) Initializing CPU#1 (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K (XEN) CPU: L2 cache: 1024K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU1: Intel Extended MCE MSRs (12) available (XEN) Intel machine check reporting enabled on CPU#1. (XEN) CPU1: Thermal monitoring enabled (TM1) (XEN) CMCI: CPU1 has no CMCI support (XEN) CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04 (XEN) Total of 2 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) checking TSC synchronization across 2 CPUs: passed. (XEN) Platform timer is 3.579MHz ACPI PM Timer (XEN) Brought up 2 CPUs (XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) I/O virtualisation disabled (XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'. (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 32-bit, PAE, lsb (XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0x400000 -> 0xac1000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 000000003c000000->000000003e000000 (253952 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0400000->c0ac1000 (XEN) Init. ramdisk: c0ac1000->c1173e00 (XEN) Phys-Mach map: c1174000->c1274000 (XEN) Start info: c1274000->c127447c (XEN) Page tables: c1275000->c1284000 (XEN) Boot stack: c1284000->c1285000 (XEN) TOTAL: c0000000->c1400000 (XEN) ENTRY ADDRESS: c0883000 (XEN) Dom0 has maximum 2 VCPUs (XEN) Scrubbing Free RAM: ..........done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 116kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... Reserving virtual address space above 0xf5800000 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.31-rc5 (root@dom0test.localdomain) (gcc version 4.4.0 20090506 (Red Hat 4.4.0-4) (GCC) ) #24 SMP Mon A ug 17 17:07:04 EEST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009f400 (usable) Xen: 000000000009f400 - 0000000000100000 (reserved) Xen: 0000000000100000 - 0000000040000000 (usable) Xen: 000000007f6e0000 - 000000007f6e3000 (ACPI NVS) Xen: 000000007f6e3000 - 000000007f6f0000 (ACPI data) Xen: 000000007f6f0000 - 000000007f700000 (reserved) Xen: 00000000e0000000 - 00000000f0000000 (reserved) Xen: 00000000fec00000 - 0000000100000000 (reserved) console [xenboot0] enabled DMI 2.3 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. last_pfn = 0x40000 max_arch_pfn = 0x1000000 init_memory_mapping: 0000000000000000-00000000229fe000 RAMDISK: 00ac1000 - 01173e00 ACPI: RSDP 000f7b80 00014 (v00 IntelR) ACPI: RSDT 7f6e3040 00030 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) ACPI: FACP 7f6e30c0 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) ACPI: DSDT 7f6e3180 04085 (v01 INTELR AWRDACPI 00001000 MSFT 0100000E) ACPI: FACS 7f6e0000 00040 ACPI: MCFG 7f6e7380 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) ACPI: APIC 7f6e7280 00090 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) 470MB HIGHMEM available. 553MB LOWMEM available. mapped low ram: 0 - 229fe000 low ram: 0 - 229fe000 node 0 low ram: 00000000 - 229fe000 node 0 bootmap 00010000 - 00014540 (10 early reservations) ==> bootmem [0000000000 - 00229fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001275000 - 0001284000] XEN PAGETABLES ==> [0001275000 - 0001284000] #2 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #3 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #4 [0000400000 - 000099bccc] TEXT DATA BSS ==> [0000400000 - 000099bccc] #5 [0000ac1000 - 0001173e00] RAMDISK ==> [0000ac1000 - 0001173e00] #6 [0001174000 - 0001275000] XEN START INFO ==> [0001174000 - 0001275000] #7 [000099c000 - 000099c0f8] BRK ==> [000099c000 - 000099c0f8] #8 [0000100000 - 0000208000] PGTABLE ==> [0000100000 - 0000208000] #9 [0000010000 - 0000015000] BOOTMAP ==> [0000010000 - 0000015000] found SMP MP-table at [c00f3a50] f3a50 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000229fe HighMem 0x000229fe -> 0x00040000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x00040000 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: Unable to change apic_id! IOAPIC[0]: apic_id 255, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x05] address[0xfec84400] gsi_base[24]) IOAPIC[1]: apic_id 5, version 32, address 0xfec84400, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Enabling APIC mode: Flat. Using 2 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs (XEN) io_apic.c:2126: (XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1 (XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900 (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ! (XEN) io_apic.c:2126: (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1 (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900 (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ! Allocating PCI resources starting at 7f700000 (gap: 7f700000:60900000) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Allocated 11 4k pages, static data 41884 bytes Xen: using vcpu_info placement Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259982 Kernel command line: ro root=/dev/mapper/vg_dom0test-lv01 console=hvc0 earlyprintk=xen PID hash table entries: 4096 (order: 12, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between c1b68000 - c5b68000 software IO TLB at phys 0x1b68000 - 0x5b68000 Initializing HighMem for node 0 (000229fe:00040000) Memory: 957448k/1048576k available (2960k kernel code, 89828k reserved, 1636k data, 440k init, 481288k highmem) virtual kernel memory layout: fixmap : 0xf567e000 - 0xf57ff000 (1540 kB) pkmap : 0xf5200000 - 0xf5400000 (2048 kB) vmalloc : 0xe31fe000 - 0xf51fe000 ( 288 MB) lowmem : 0xc0000000 - 0xe29fe000 ( 553 MB) .init : 0xc0883000 - 0xc08f1000 ( 440 kB) .data : 0xc06e413d - 0xc087d1e0 (1636 kB) .text : 0xc0400000 - 0xc06e413d (2960 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 start_kernel(): bug: interrupts were enabled *very* early, fixing it NR_IRQS:2304 nr_irqs:512 xen_set_ioapic_routing: irq 0 gsi 0 vector 240 ioapic 0 pin 0 triggering 0 polarity 0 (XEN) io_apic.c:2139: (XEN) ioapic_guest_write: apic=0, pin=0, old_irq=-1, new_irq=0 (XEN) ioapic_guest_write: old_entry=00010900, new_entry=000009f0 (XEN) ioapic_guest_write: Attempt to add IO-APIC pin for in-use IRQ! xen_set_ioapic_routing: irq 1 gsi 1 vector 32 ioapic 0 pin 1 triggering 0 polarity 0 xen_set_ioapic_routing: irq 3 gsi 3 vector 40 ioapic 0 pin 3 triggering 0 polarity 0 xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4 triggering 0 polarity 0 xen_set_ioapic_routing: irq 5 gsi 5 vector 48 ioapic 0 pin 5 triggering 0 polarity 0 xen_set_ioapic_routing: irq 6 gsi 6 vector 56 ioapic 0 pin 6 triggering 0 polarity 0 xen_set_ioapic_routing: irq 7 gsi 7 vector 64 ioapic 0 pin 7 triggering 0 polarity 0 xen_set_ioapic_routing: irq 8 gsi 8 vector 72 ioapic 0 pin 8 triggering 0 polarity 0 xen_set_ioapic_routing: irq 9 gsi 9 vector 80 ioapic 0 pin 9 triggering 1 polarity 0 xen_set_ioapic_routing: irq 10 gsi 10 vector 88 ioapic 0 pin 10 triggering 0 polarity 0 xen_set_ioapic_routing: irq 11 gsi 11 vector 96 ioapic 0 pin 11 triggering 0 polarity 0 xen_set_ioapic_routing: irq 12 gsi 12 vector 104 ioapic 0 pin 12 triggering 0 polarity 0 xen_set_ioapic_routing: irq 13 gsi 13 vector 112 ioapic 0 pin 13 triggering 0 polarity 0 xen_set_ioapic_routing: irq 14 gsi 14 vector 120 ioapic 0 pin 14 triggering 0 polarity 0 xen_set_ioapic_routing: irq 15 gsi 15 vector 136 ioapic 0 pin 15 triggering 0 polarity 0 Detected 3000.108 MHz processor. Console: colour VGA+ 80x25 console handover: boot [xenboot0] -> real [hvc0] installing Xen timer for CPU 0 Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.21 BogoMIPS (lpj=3000108) Security Framework initialized SELinux: Initializing. Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 (XEN) mce_intel.c:940:d0 MCE: rdmsr MCG_CAP lo c0204 hi 0 mce: CPU supports 4 MCE banks (XEN) mce_intel.c:940:d0 MCE: rdmsr MCG_CAP lo c0204 hi 0 (XEN) mce_intel.c:935:d0 MCE: rd MCG_STATUS lo 0 hi 0 (XEN) mce_intel.c:981:d0 MCE: rd MC0_STATUS (XEN) mce_intel.c:981:d0 MCE: rd MC1_STATUS (XEN) mce_intel.c:981:d0 MCE: rd MC2_STATUS (XEN) mce_intel.c:981:d0 MCE: rd MC3_STATUS (XEN) mce_intel.c:940:d0 MCE: rdmsr MCG_CAP lo c0204 hi 0 (XEN) mce_intel.c:901:d0 MCE: wr MC0_STATUS 0 (XEN) mce_intel.c:901:d0 MCE: wr MC1_STATUS 0 (XEN) mce_intel.c:901:d0 MCE: wr MC2_STATUS 0 (XEN) mce_intel.c:901:d0 MCE: wr MC3_STATUS 0 Performance Counters: no PMU driver, software counters only. SMP alternatives: switching to UP code ACPI: Core revision 20090521 cpu 0 spinlock event irq 49 installing Xen timer for CPU 1 cpu 1 spinlock event irq 55 SMP alternatives: switching to SMP code (XEN) mce_intel.c:940:d0 MCE: rdmsr MCG_CAP lo c0204 hi 0 (XEN) mce_intel.c:940:d0 MCE: rdmsr MCG_CAP lo c0204 hi 0 (XEN) mce_intel.c:935:d0 MCE: rd MCG_STATUS lo 0 hi 0 (XEN) mce_intel.c:981:d0 MCE: rd MC0_STATUS (XEN) mce_intel.c:981:d0 MCE: rd MC1_STATUS (XEN) mce_intel.c:981:d0 MCE: rd MC2_STATUS (XEN) mce_intel.c:981:d0 MCE: rd MC3_STATUS (XEN) mce_intel.c:940:d0 MCE: rdmsr MCG_CAP lo c0204 hi 0 (XEN) mce_intel.c:901:d0 MCE: wr MC0_STATUS 0 (XEN) mce_intel.c:901:d0 MCE: wr MC1_STATUS 0 (XEN) mce_intel.c:901:d0 MCE: wr MC2_STATUS 0 (XEN) mce_intel.c:901:d0 MCE: wr MC3_STATUS 0 Initializing CPU#1 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 4 MCE banks Brought up 2 CPUs Booting paravirtualized kernel on Xen Xen version: 3.4.1 (preserve-AD) (dom0) Grant table initialized Time: 17:49:49 Date: 08/17/09 NET: Registered protocol family 16 xenbus_probe_init ok ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Interpreter enabled ACPI: (supports S0 S1 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0ca0-0caf pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:01:00.0: PXH quirk detected; SHPC device MSI disabled pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:04:00.0: PME# supported from D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:05:00.0: PME# supported from D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1e.0: transparent bridge ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 12 14 15) xenbus_probe_backend_init bus registered ok xenbus_probe_frontend_init bus registered ok xen_balloon: Initialising balloon driver. SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing IO APIC resources couldn't be allocated. NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Xen: Initializing Xen DMA ops Xen: Enabling DMA fallback to swiotlb HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered xen_allocate_pirq: returning irq 8 for gsi 8 xen_set_ioapic_routing: irq 8 gsi 8 vector 72 ioapic 0 pin 8 triggering 0 polarity 0 xen_allocate_pirq: returning irq 13 for gsi 13 xen_set_ioapic_routing: irq 13 gsi 13 vector 112 ioapic 0 pin 13 triggering 0 polarity 0 xen_allocate_pirq: returning irq 6 for gsi 6 xen_set_ioapic_routing: irq 6 gsi 6 vector 56 ioapic 0 pin 6 triggering 0 polarity 0 xen_allocate_pirq: returning irq 4 for gsi 4 xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4 triggering 0 polarity 0 xen_allocate_pirq: returning irq 3 for gsi 3 xen_set_ioapic_routing: irq 3 gsi 3 vector 40 ioapic 0 pin 3 triggering 0 polarity 0 xen_allocate_pirq: returning irq 7 for gsi 7 xen_set_ioapic_routing: irq 7 gsi 7 vector 64 ioapic 0 pin 7 triggering 0 polarity 0 xen_allocate_pirq: returning irq 1 for gsi 1 xen_set_ioapic_routing: irq 1 gsi 1 vector 32 ioapic 0 pin 1 triggering 0 polarity 0 pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0xb78-0xb7b has been reserved system 00:01: ioport range 0xf78-0xf7b has been reserved system 00:01: ioport range 0xa78-0xa7b has been reserved system 00:01: ioport range 0xe78-0xe7b has been reserved system 00:01: ioport range 0xbbc-0xbbf has been reserved system 00:01: ioport range 0xfbc-0xfbf has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x880-0x88f has been reserved system 00:01: ioport range 0xca8-0xcaf has been reserved system 00:0b: ioport range 0x400-0x4bf could not be reserved system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved system 00:0e: iomem range 0xc9400-0xcbfff could not be reserved system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved system 00:0e: iomem range 0xfc000-0xfffff could not be reserved system 00:0e: iomem range 0x7f6e0000-0x7f6fffff could not be reserved system 00:0e: iomem range 0x0-0x9ffff could not be reserved system 00:0e: iomem range 0x100000-0x7f6dffff could not be reserved system 00:0e: iomem range 0xfec00000-0xfecfffff has been reserved system 00:0e: iomem range 0xfee00000-0xfeefffff has been reserved system 00:0e: iomem range 0xffb00000-0xffb7ffff has been reserved system 00:0e: iomem range 0xfff00000-0xffffffff has been reserved system 00:0e: iomem range 0xe0000-0xeffff could not be reserved pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 pci 0000:01:00.0: IO window: 0xc000-0xcfff pci 0000:01:00.0: MEM window: 0xd0000000-0xd00fffff pci 0000:01:00.0: PREFETCH window: 0x7f700000-0x7f7fffff pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xc000-0xcfff pci 0000:00:01.0: MEM window: 0xd0000000-0xd01fffff pci 0000:00:01.0: PREFETCH window: 0x7f700000-0x7f7fffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.2: IO window: disabled pci 0000:00:1c.2: MEM window: 0xd0200000-0xd02fffff pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.3: IO window: disabled pci 0000:00:1c.3: MEM window: 0xd0300000-0xd03fffff pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 pci 0000:00:1e.0: IO window: 0xd000-0xdfff pci 0000:00:1e.0: MEM window: 0xd0400000-0xd04fffff pci 0000:00:1e.0: PREFETCH window: 0x7f800000-0x7f8fffff xen_set_ioapic_routing: irq 16 gsi 16 vector 144 ioapic 0 pin 16 triggering 1 polarity 1 pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 xen_allocate_pirq: returning irq 16 for gsi 16 xen_set_ioapic_routing: irq 16 gsi 16 vector 144 ioapic 0 pin 16 triggering 1 polarity 1 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 xen_set_ioapic_routing: irq 18 gsi 18 vector 152 ioapic 0 pin 18 triggering 1 polarity 1 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 xen_set_ioapic_routing: irq 19 gsi 19 vector 160 ioapic 0 pin 19 triggering 1 polarity 1 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 6859k freed apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1250531391.743:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 945 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Event-channel device installed. ***blkif_init *** netif_init registering netback Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel E7221 (i915) Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled (XEN) irq.c:640:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'. (XEN) irq.c:640:d0 Cannot bind IRQ 0 to guest. In use by 'timer'. (XEN) irq.c:640:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'. (XEN) irq.c:640:d0 Cannot bind IRQ 0 to guest. In use by 'timer'. (XEN) irq.c:640:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'. (XEN) irq.c:640:d0 Cannot bind IRQ 0 to guest. In use by 'timer'. (XEN) irq.c:640:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'. (XEN) irq.c:640:d0 Cannot bind IRQ 0 to guest. In use by 'timer'. serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Platform driver 'serial8250' needs updating - please use dev_pm_ops 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module loaded xen_allocate_pirq: returning irq 19 for gsi 19 xen_set_ioapic_routing: irq 19 gsi 19 vector 160 ioapic 0 pin 19 triggering 1 polarity 1 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl IDE mode ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xd05c3000 port 0xd05c3100 irq 19 ata2: SATA max UDMA/133 abar m1024@0xd05c3000 port 0xd05c3180 irq 19 ata3: SATA max UDMA/133 abar m1024@0xd05c3000 port 0xd05c3200 irq 19 ata4: SATA max UDMA/133 abar m1024@0xd05c3000 port 0xd05c3280 irq 19 xen_allocate_pirq: returning irq 18 for gsi 18 xen_set_ioapic_routing: irq 18 gsi 18 vector 152 ioapic 0 pin 18 triggering 1 polarity 1 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 scsi4 : ata_piix scsi5 : ata_piix ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver xen_set_ioapic_routing: irq 23 gsi 23 vector 168 ioapic 0 pin 23 triggering 1 polarity 1 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: EHCI Host Controller ata1: SATA link down (SStatus 0 SControl 300) ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd05c0000 ata5.00: ATA-7: ST3160812A, 3.AAJ, max UDMA/100 ata5.00: 312581808 sectors, multi 16: LBA48 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata5.00: configured for UDMA/100 ata2: SATA link down (SStatus 0 SControl 300) (XEN) io_apic.c:2139: (XEN) ioapic_guest_write: apic=0, pin=23, old_irq=23, new_irq=23 (XEN) ioapic_guest_write: old_entry=0000a9a8, new_entry=0001a9a8 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) io_apic.c:2139: (XEN) ioapic_guest_write: apic=0, pin=19, old_irq=19, new_irq=19 (XEN) ioapic_guest_write: old_entry=0000a9a0, new_entry=0001a9a0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31-rc5 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver xen_allocate_pirq: returning irq 23 for gsi 23 xen_set_ioapic_routing: irq 23 gsi 23 vector 168 ioapic 0 pin 23 triggering 1 polarity 1 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.31-rc5 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 19 for gsi 19 xen_set_ioapic_routing: irq 19 gsi 19 vector 160 ioapic 0 pin 19 triggering 1 polarity 1 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.31-rc5 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 18 for gsi 18 xen_set_ioapic_routing: irq 18 gsi 18 vector 152 ioapic 0 pin 18 triggering 1 polarity 1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.31-rc5 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 16 for gsi 16 xen_set_ioapic_routing: irq 16 gsi 16 vector 144 ioapic 0 pin 16 triggering 1 polarity 1 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.31-rc5 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp Platform driver 'i8042' needs updating - please use dev_pm_ops serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 242 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 5:879:845 scsi 4:0:0:0: Direct-Access ATA ST3160812A 3.AA PQ: 0 ANSI: 5 sd 4:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 4:0:0:0: Attached scsi generic sg0 type 0 sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 4:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 440k freed Write protecting the kernel text: 2964k Write protecting the kernel read-only data: 1368k Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. SELinux: Disabled at runtime. type=1404 audit(1250531397.802:2): selinux=0 auid=4294967295 ses=4294967295 Welcome to Fedora Press 'I' to enter interactive startup. Starting udev: (XEN) io_apic.c:2139: (XEN) ioapic_guest_write: apic=0, pin=16, old_irq=16, new_irq=16 (XEN) ioapic_guest_write: old_entry=0000a990, new_entry=0001a990 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) io_apic.c:2139: (XEN) ioapic_guest_write: apic=0, pin=18, old_irq=18, new_irq=18 (XEN) ioapic_guest_write: old_entry=0000a998, new_entry=0001a998 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) io_apic.c:2139: (XEN) ioapic_guest_write: apic=0, pin=19, old_irq=19, new_irq=19 (XEN) ioapic_guest_write: old_entry=0000a9a0, new_entry=0001a9a0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) io_apic.c:2139: (XEN) ioapic_guest_write: apic=0, pin=19, old_irq=19, new_irq=19 (XEN) ioapic_guest_write: old_entry=0000a9a0, new_entry=0001a9a0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! [ OK ] Setting hostname dom0test.localdomain: [ OK ] mdadm: No arrays found in config file or automatically Setting up Logical Volume Management: 2 logical volume(s) in volume group "vg_dom0test" now active [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/mapper/vg_dom0test-lv01 /dev/mapper/vg_dom0test-lv01: clean, 334645/2621440 files, 4965657/10485760 blocks [/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1 /dev/sda1: clean, 118/128016 files, 166604/512000 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: mount: none already mounted or /proc/xen busy [FAILED] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ OK ] Entering non-interactive startup ip6tables: Applying firewall rules: [ OK ] iptables: Applying firewall rules: [ OK ] Starting auditd: [ OK ] Starting portreserve: [ OK ] Starting system logger: [ OK ] Starting irqbalance: [ OK ] Starting rpcbind: [ OK ] Starting system message bus: [ OK ] Starting Avahi daemon... [ OK ] Starting cups: [ OK ] Starting acpi daemon: [ OK ] Starting HAL daemon: [ OK ] Starting PC/SC smart card daemon (pcscd): [ OK ] Setting network parameters... [ OK ] Starting NetworkManager daemon: [ OK ] Starting NFS statd: [ OK ] Starting RPC idmapd: [ OK ] Starting sshd: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting console mouse services: [ OK ] Starting crond: [ OK ][ OK ] Starting atd: [ OK ][ OK ] Starting xenstored daemon: [ OK ] Starting libvirtd daemon: xenbus_probe wake_waiting xenbus_probe wake_waiting xenbus_probe_devices backend xenbus_probe_devices failed xenbus_directory backend_probe_and_watch devices probed ok backend_probe_and_watch watch add ok ok backend_probe_and_watch all done xenbus_probe_devices device xenbus_probe_devices failed xenbus_directory frontend_probe_and_watch devices probed ok frontend_probe_and_watch watch add ok ok frontend_probe_and_watch all done [ OK ] Starting xenconsoled daemon: [ OK ] Starting xend daemon: [ OK ] Fedora release 11 (Leonidas) Kernel 2.6.31-rc5 on an i686 (/dev/hvc0) dom0test.localdomain login: