__ __ _____ _____ _ \ \/ /___ _ __ |___ / |___ / / | \ // _ \ '_ \ |_ \ |_ \ | | / \ __/ | | | ___) | ___) || | /_/\_\___|_| |_| |____(_)____(_)_| (XEN) Xen version 3.3.1 (root@localdomain) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) Tue Feb 3 22:47:10 EET 2009 (XEN) Latest ChangeSet: unavailable (XEN) Command line: dom0_mem=1024M loglvl=all guest_loglvl=all com1=19200,8n1 console=com1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009f400 (usable) (XEN) 000000000009f400 - 00000000000a0000 (reserved) (XEN) 00000000000f0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000007f6e0000 (usable) (XEN) 000000007f6e0000 - 000000007f6e3000 (ACPI NVS) (XEN) 000000007f6e3000 - 000000007f6f0000 (ACPI data) (XEN) 000000007f6f0000 - 000000007f700000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 0000000100000000 (reserved) (XEN) System RAM: 2038MB (2087420kB) (XEN) ACPI: RSDP 000F7B80, 0014 (r0 IntelR) (XEN) ACPI: RSDT 7F6E3040, 0030 (r1 IntelR AWRDACPI 42302E31 AWRD 0) (XEN) ACPI: FACP 7F6E30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0) (XEN) ACPI: DSDT 7F6E3180, 4085 (r1 INTELR AWRDACPI 1000 MSFT 100000E) (XEN) ACPI: FACS 7F6E0000, 0040 (XEN) ACPI: MCFG 7F6E7380, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0) (XEN) ACPI: APIC 7F6E7280, 0090 (r1 IntelR AWRDACPI 42302E31 AWRD 0) (XEN) NUMA turned off (XEN) Faking a node at 0000000000000000-000000007f6e0000 (XEN) Xen heap: 9MB (9688kB) (XEN) Domain heap initialised (XEN) found SMP MP-table at 000f3a50 (XEN) DMI 2.3 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x408 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0] (XEN) ACPI: wakeup_vec[7f6e000c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 15:3 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) (XEN) Processor #1 15:3 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: IOAPIC (id[0x05] address[0xfec84400] gsi_base[24]) (XEN) IOAPIC[1]: apic_id 5, version 32, address 0xfec84400, GSI 24-47 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Initializing CPU#0 (XEN) Detected 3000.273 MHz processor. (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K (XEN) CPU: L2 cache: 1024K (XEN) CPU: Physical Processor ID: 0 (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#0. (XEN) CPU0: Intel P4/Xeon Extended MCE MSRs (12) available (XEN) CPU0: Thermal monitoring enabled (XEN) CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04 (XEN) Booting processor 1/1 eip 8c000 (XEN) Initializing CPU#1 (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K (XEN) CPU: L2 cache: 1024K (XEN) CPU: Physical Processor ID: 0 (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#1. (XEN) CPU1: Intel P4/Xeon Extended MCE MSRs (12) available (XEN) CPU1: Thermal monitoring enabled (XEN) CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04 (XEN) Total of 2 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) checking TSC synchronization across 2 CPUs: passed. (XEN) Platform timer is 3.579MHz ACPI PM Timer (XEN) Brought up 2 CPUs (XEN) I/O virtualisation disabled (XEN) ACPI sleep modes: S3 (XEN) MCA: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 32-bit, PAE, lsb (XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0x400000 -> 0x9fb000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 000000003c000000->000000003e000000 (253952 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0400000->c09fb000 (XEN) Init. ramdisk: c09fb000->c1152200 (XEN) Phys-Mach map: c1153000->c1253000 (XEN) Start info: c1253000->c1253474 (XEN) Page tables: c1254000->c1263000 (XEN) Boot stack: c1263000->c1264000 (XEN) TOTAL: c0000000->c1400000 (XEN) ENTRY ADDRESS: c087a000 (XEN) Dom0 has maximum 2 VCPUs (XEN) Scrubbing Free RAM: ..........done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 112kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... Reserving virtual address space above 0xf5800000 PAT disabled on Xen Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.29-rc5-tip (root@dom0test.localdomain) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP We d Feb 18 21:47:46 EET 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009f400 (usable) Xen: 000000000009f400 - 0000000000100000 (reserved) Xen: 0000000000100000 - 0000000001153000 (usable) Xen: 0000000001153000 - 0000000001254000 (reserved) Xen: 0000000001254000 - 0000000040000000 (usable) Xen: 000000007f6e0000 - 000000007f6e3000 (ACPI NVS) Xen: 000000007f6e3000 - 000000007f6f0000 (ACPI data) Xen: 000000007f6f0000 - 000000007f700000 (reserved) Xen: 00000000e0000000 - 00000000f0000000 (reserved) Xen: 00000000fec00000 - 0000000100000000 (reserved) console [xenboot0] enabled DMI 2.3 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. last_pfn = 0x40000 max_arch_pfn = 0x1000000 RAMDISK: 009fb000 - 01152200 ACPI: RSDP 000F7B80, 0014 (r0 IntelR) ACPI: RSDT 7F6E3040, 0030 (r1 IntelR AWRDACPI 42302E31 AWRD 0) ACPI: FACP 7F6E30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0) FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT 7F6E3180, 4085 (r1 INTELR AWRDACPI 1000 MSFT 100000E) ACPI: FACS 7F6E0000, 0040 ACPI: MCFG 7F6E7380, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0) ACPI: APIC 7F6E7280, 0090 (r1 IntelR AWRDACPI 42302E31 AWRD 0) 472MB HIGHMEM available. 551MB LOWMEM available. mapped low ram: 0 - 227fe000 low ram: 00000000 - 227fe000 bootmap 00010000 - 00014500 (8 early reservations) ==> bootmem [0000000000 - 00227fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 00009fa048] TEXT DATA BSS ==> [0000400000 - 00009fa048] #4 [00009fb000 - 0001152200] RAMDISK ==> [00009fb000 - 0001152200] #5 [0001254000 - 0001263000] INIT_PG_TABLE ==> [0001254000 - 0001263000] #6 [0000100000 - 0000208000] PGTABLE ==> [0000100000 - 0000208000] #7 [0000010000 - 0000015000] BOOTMAP ==> [0000010000 - 0000015000] Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000227fe HighMem 0x000227fe -> 0x00040000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x00001153 0: 0x00001254 -> 0x00040000 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: Skipping IOAPIC probe due to 'noapic' option. Using ACPI for processor (LAPIC) configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs Allocating PCI resources starting at 80000000 (gap: 7f700000:60900000) NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Allocating 40960 bytes of per cpu data Xen: using vcpu_info placement Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259725 Kernel command line: ro root=/dev/vg00/lv01 console=hvc0 earlyprintk=xen pci=nomsi noapic Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 NR_IRQS:2304 nr_irqs:288 xen: allocated irq 9 for acpi 9 xen_allocate_pirq: returning irq 9 for gsi 9 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 3000.114 MHz processor. Console: colour VGA+ 80x25 console handover: boot [xenboot0] -> real [hvc0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between c1b53000 - c5b53000 software IO TLB at phys 0x1b53000 - 0x5b53000 Memory: 956344k/1048576k available (2953k kernel code, 89884k reserved, 1608k data, 420k init, 483336k highmem) virtual kernel memory layout: fixmap : 0xf5458000 - 0xf57ff000 (3740 kB) pkmap : 0xf5000000 - 0xf5200000 (2048 kB) vmalloc : 0xe2ffe000 - 0xf4ffe000 ( 288 MB) lowmem : 0xc0000000 - 0xe27fe000 ( 551 MB) .init : 0xc087a000 - 0xc08e3000 ( 420 kB) .data : 0xc06e2639 - 0xc08746f8 (1608 kB) .text : 0xc0400000 - 0xc06e2639 (2953 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 installing Xen timer for CPU 0 Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.22 BogoMIPS (lpj=3000114) Security Framework initialized SELinux: Initializing. Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. (XEN) traps.c:2171:d0 Domain attempted WRMSR 00000400 from 00000000:0000ffff to ffffffff:ffffffff. (XEN) traps.c:2171:d0 Domain attempted WRMSR 00000404 from 00000000:00018000 to ffffffff:ffffffff. (XEN) traps.c:2171:d0 Domain attempted WRMSR 00000408 from 00000000:00000080 to ffffffff:ffffffff. (XEN) traps.c:2171:d0 Domain attempted WRMSR 0000040c from 00000000:0000007e to ffffffff:ffffffff. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available SMP alternatives: switching to UP code ACPI: Core revision 20081204 ACPI: setting ELCR to 0200 (from 1620) cpu 0 spinlock event irq 17 installing Xen timer for CPU 1 cpu 1 spinlock event irq 23 SMP alternatives: switching to SMP code (XEN) traps.c:2171:d0 Domain attempted WRMSR 00000400 from 00000000:0000ffff to ffffffff:ffffffff. (XEN) traps.c:2171:d0 Domain attempted WRMSR 00000404 from 00000000:00018000 to ffffffff:ffffffff. (XEN) traps.c:2171:d0 Domain attempted WRMSR 00000408 from 00000000:00000080 to ffffffff:ffffffff. (XEN) traps.c:2171:d0 Domain attempted WRMSR 0000040c from 00000000:0000007e to ffffffff:ffffffff. Initializing CPU#1 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available Brought up 2 CPUs net_namespace: 1064 bytes Booting paravirtualized kernel on Xen Xen version: 3.3.1 (preserve-AD) (dom0) Grant table initialized Time: 23:21:54 Date: 02/18/09 NET: Registered protocol family 16 xenbus_probe_init ok ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Interpreter enabled ACPI: (supports S0 S1 S5) ACPI: Using PIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0ca0-0caf pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:01:00.0: PXH quirk detected; SHPC device MSI disabled pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:04:00.0: PME# supported from D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:05:00.0: PME# supported from D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1e.0: transparent bridge ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 12 14 15) xen_balloon: Initialising balloon driver. SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Xen: Initializing Xen DMA ops Xen: Enabling DMA fallback to swiotlb HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered xen_allocate_pirq: returning irq 8 for gsi 8 ERROR: Unable to locate IOAPIC for GSI 8 xen_set_ioapic_routing: irq 8 gsi 8 ioapic -1 xen_allocate_pirq: returning irq 13 for gsi 13 ERROR: Unable to locate IOAPIC for GSI 13 xen_set_ioapic_routing: irq 13 gsi 13 ioapic -1 xen_allocate_pirq: returning irq 6 for gsi 6 ERROR: Unable to locate IOAPIC for GSI 6 xen_set_ioapic_routing: irq 6 gsi 6 ioapic -1 xen_allocate_pirq: returning irq 4 for gsi 4 ERROR: Unable to locate IOAPIC for GSI 4 xen_set_ioapic_routing: irq 4 gsi 4 ioapic -1 xen_allocate_pirq: returning irq 3 for gsi 3 ERROR: Unable to locate IOAPIC for GSI 3 xen_set_ioapic_routing: irq 3 gsi 3 ioapic -1 xen_allocate_pirq: returning irq 7 for gsi 7 ERROR: Unable to locate IOAPIC for GSI 7 xen_set_ioapic_routing: irq 7 gsi 7 ioapic -1 xen_allocate_pirq: returning irq 12 for gsi 12 ERROR: Unable to locate IOAPIC for GSI 12 xen_set_ioapic_routing: irq 12 gsi 12 ioapic -1 xen_allocate_pirq: returning irq 1 for gsi 1 ERROR: Unable to locate IOAPIC for GSI 1 xen_set_ioapic_routing: irq 1 gsi 1 ioapic -1 pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0xb78-0xb7b has been reserved system 00:01: ioport range 0xf78-0xf7b has been reserved system 00:01: ioport range 0xa78-0xa7b has been reserved system 00:01: ioport range 0xe78-0xe7b has been reserved system 00:01: ioport range 0xbbc-0xbbf has been reserved system 00:01: ioport range 0xfbc-0xfbf has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x880-0x88f has been reserved system 00:01: ioport range 0xca8-0xcaf has been reserved system 00:0c: ioport range 0x400-0x4bf could not be reserved system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved system 00:0f: iomem range 0xf0000-0xf3fff could not be reserved system 00:0f: iomem range 0xf4000-0xf7fff could not be reserved system 00:0f: iomem range 0xf8000-0xfbfff could not be reserved system 00:0f: iomem range 0xfc000-0xfffff could not be reserved system 00:0f: iomem range 0x0-0xfffff could not be reserved system 00:0f: iomem range 0x0-0x9ffff could not be reserved system 00:0f: iomem range 0x100000-0xffffffff could not be reserved system 00:0f: iomem range 0xfec00000-0xfecfffff has been reserved system 00:0f: iomem range 0xfee00000-0xfeefffff has been reserved system 00:0f: iomem range 0xffb00000-0xffb7ffff has been reserved system 00:0f: iomem range 0xfff00000-0xffffffff has been reserved system 00:0f: iomem range 0xe0000-0xeffff could not be reserved pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 pci 0000:01:00.0: IO window: 0xc000-0xcfff pci 0000:01:00.0: MEM window: 0xd0000000-0xd00fffff pci 0000:01:00.0: PREFETCH window: 0x00000080000000-0x000000800fffff pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xc000-0xcfff pci 0000:00:01.0: MEM window: 0xd0000000-0xd01fffff pci 0000:00:01.0: PREFETCH window: 0x00000080000000-0x000000800fffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.2: IO window: disabled pci 0000:00:1c.2: MEM window: 0xd0200000-0xd02fffff pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.3: IO window: disabled pci 0000:00:1c.3: MEM window: 0xd0300000-0xd03fffff pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 pci 0000:00:1e.0: IO window: 0xd000-0xdfff pci 0000:00:1e.0: MEM window: 0xd0400000-0xd04fffff pci 0000:00:1e.0: PREFETCH window: 0x00000080100000-0x000000801fffff ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 12 xen_allocate_pirq: returning irq 12 for gsi 12 ERROR: Unable to locate IOAPIC for GSI 12 xen_set_ioapic_routing: irq 12 gsi 12 ioapic -1 pci 0000:00:01.0: PCI INT A -> Link[LNKA] -> GSI 12 (level, low) -> IRQ 12 xen_allocate_pirq: returning irq 12 for gsi 12 ERROR: Unable to locate IOAPIC for GSI 12 xen_set_ioapic_routing: irq 12 gsi 12 ioapic -1 pci 0000:00:1c.0: PCI INT A -> Link[LNKA] -> GSI 12 (level, low) -> IRQ 12 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 xen_allocate_pirq: returning irq 5 for gsi 5 ERROR: Unable to locate IOAPIC for GSI 5 xen_set_ioapic_routing: irq 5 gsi 5 ioapic -1 pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 xen_allocate_pirq: returning irq 10 for gsi 10 ERROR: Unable to locate IOAPIC for GSI 10 xen_set_ioapic_routing: irq 10 gsi 10 ioapic -1 pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 7516k freed apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1234999317.217:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1118 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button (CM) [PWRB] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found xenbus_probe_backend_init bus registered ok xenbus_probe_frontend_init bus registered ok Event-channel device installed. ***blkif_init *** netif_init registering netback Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel E7221 (i915) Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled (XEN) irq.c:513:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'. (XEN) irq.c:513:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. (XEN) irq.c:513:d0 Cannot bind IRQ 0 to guest. In use by 'timer'. (XEN) irq.c:513:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'. (XEN) irq.c:513:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. (XEN) irq.c:513:d0 Cannot bind IRQ 0 to guest. In use by 'timer'. (XEN) irq.c:513:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'. (XEN) irq.c:513:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. (XEN) irq.c:513:d0 Cannot bind IRQ 0 to guest. In use by 'timer'. (XEN) irq.c:513:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'. (XEN) irq.c:513:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. (XEN) irq.c:513:d0 Cannot bind IRQ 0 to guest. In use by 'timer'. serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods xen_allocate_pirq: returning irq 10 for gsi 10 ERROR: Unable to locate IOAPIC for GSI 10 xen_set_ioapic_routing: irq 10 gsi 10 ioapic -1 ahci 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl IDE mode ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xd05c3000 port 0xd05c3100 irq 10 ata2: SATA max UDMA/133 abar m1024@0xd05c3000 port 0xd05c3180 irq 10 ata3: SATA max UDMA/133 abar m1024@0xd05c3000 port 0xd05c3200 irq 10 ata4: SATA max UDMA/133 abar m1024@0xd05c3000 port 0xd05c3280 irq 10 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) xen_allocate_pirq: returning irq 5 for gsi 5 ERROR: Unable to locate IOAPIC for GSI 5 xen_set_ioapic_routing: irq 5 gsi 5 ioapic -1 ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5 scsi4 : ata_piix scsi5 : ata_piix ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 ata5.00: ATA-6: ST3120022A, 3.06, max UDMA/100 ata5.00: 234441648 sectors, multi 16: LBA48 ata5.00: configured for UDMA/100 scsi 4:0:0:0: Direct-Access ATA ST3120022A 3.06 PQ: 0 ANSI: 5 sd 4:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 4:0:0:0: [sda] Attached SCSI disk sd 4:0:0:0: Attached scsi generic sg0 type 0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 9 xen_allocate_pirq: returning irq 9 for gsi 9 ERROR: Unable to locate IOAPIC for GSI 9 xen_set_ioapic_routing: irq 9 gsi 9 ioapic -1 ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNK1] -> GSI 9 (level, low) -> IRQ 9 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 9, io mem 0xd05c0000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.29-rc5-tip ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver xen_allocate_pirq: returning irq 9 for gsi 9 ERROR: Unable to locate IOAPIC for GSI 9 xen_set_ioapic_routing: irq 9 gsi 9 ioapic -1 uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNK1] -> GSI 9 (level, low) -> IRQ 9 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 9, io base 0x0000e000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.29-rc5-tip uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 10 for gsi 10 ERROR: Unable to locate IOAPIC for GSI 10 xen_set_ioapic_routing: irq 10 gsi 10 ioapic -1 uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 10, io base 0x0000e100 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.29-rc5-tip uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 5 for gsi 5 ERROR: Unable to locate IOAPIC for GSI 5 xen_set_ioapic_routing: irq 5 gsi 5 ioapic -1 uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 5, io base 0x0000e200 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.29-rc5-tip uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 12 for gsi 12 ERROR: Unable to locate IOAPIC for GSI 12 xen_set_ioapic_routing: irq 12 gsi 12 ioapic -1 uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 12 (level, low) -> IRQ 12 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 12, io base 0x0000e300 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.29-rc5-tip uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 242 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode IO APIC resources could be not be allocated. registered taskstats version 1 Magic number: 13:590:403 usb_endpoint usbdev5.1_ep81: hash matches Freeing unused kernel memory: 420k freed Write protecting the kernel text: 2956k Write protecting the kernel read-only data: 1312k Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Loading /lib/kbd/keymaps/i386/qwerty/fi.map kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. type=1404 audit(1234999323.789:2): selinux=0 auid=4294967295 ses=4294967295 Welcome to Fedora Press 'I' to enter interactive startup. Starting udev: [ OK ] Setting hostname dom0test.localdomain: [ OK ] Setting up Logical Volume Management: 2 logical volume(s) in volume group "vg00" now active [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/vg00/lv01 /dev/vg00/lv01: clean, 327390/1048576 files, 3532459/4194304 blocks [/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1 /boot: clean, 65/50200 files, 163221/200780 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ OK ] Entering non-interactive startup Applying Intel CPU microcode update: (XEN) traps.c:2171:d0 Domain attempted WRMSR 0000008b from 00000014:00000000 to 000 00000:00000000. (XEN) traps.c:2171:d0 Domain attempted WRMSR 0000008b from 00000014:00000000 to 00000000:00000000. (XEN) traps.c:2719: GPF (0000): ff14cdc5 -> ff1a4f1f (XEN) traps.c:2171:d0 Domain attempted WRMSR 00000079 from 00000079:00000000 to 00000000:e32f4030. (XEN) traps.c:2171:d0 Domain attempted WRMSR 0000008b from 00000014:00000000 to 00000000:00000000. (XEN) traps.c:2719: GPF (0000): ff14cdc5 -> ff1a4f1f (XEN) traps.c:2171:d0 Domain attempted WRMSR 00000079 from 00000079:00000000 to 00000000:e36e9030. (XEN) traps.c:2171:d0 Domain attempted WRMSR 0000008b from 00000014:00000000 to 00000000:00000000. [ OK ] Starting system logger: [ OK ] Starting irqbalance: [ OK ] Starting rpcbind: [ OK ] Starting NFS statd: [ OK ] Starting RPC idmapd: [ OK ] Starting system message bus: [ OK ] Starting acpi daemon: [ OK ] Starting HAL daemon: [ OK ] Starting PC/SC smart card daemon (pcscd): [ OK ] Setting network parameters... [ OK ] Starting NetworkManager daemon: [ OK ] Starting portreserve: [ OK ] Starting Bluetooth services:[ OK ] Starting sshd: [ OK ] Starting ntpd: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting console mouse services: [ OK ] Starting crond: [ OK ][ OK ] Starting atd: [ OK ][ OK ] Starting Avahi daemon... [ OK ] grep: /proc/xen/capabilities: No such file or directory grep: /proc/xen/capabilities: No such file or directory grep: /proc/xen/capabilities: No such file or directory Starting cups: [ OK ] grep: /proc/xen/capabilities: No such file or directory Fedora release 10 (Cambridge) Kernel 2.6.29-rc5-tip on an i686 (hvc0) dom0test login: Fedora release 10 (Cambridge) Kernel 2.6.29-rc5-tip on an i686 (/dev/hvc0) dom0test.localdomain login: