__ __ _____ _____ _ \ \/ /___ _ __ |___ / |___ / / | \ // _ \ '_ \ |_ \ |_ \ | | / \ __/ | | | ___) | ___) || | /_/\_\___|_| |_| |____(_)____(_)_| (XEN) Xen version 3.3.1 (root@localdomain) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) Tue Feb 3 22:47:10 EET 2009 (XEN) Latest ChangeSet: unavailable (XEN) Command line: dom0_mem=1024M loglvl=all guest_loglvl=all com1=19200,8n1 console=com1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009f400 (usable) (XEN) 000000000009f400 - 00000000000a0000 (reserved) (XEN) 00000000000f0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000007f6e0000 (usable) (XEN) 000000007f6e0000 - 000000007f6e3000 (ACPI NVS) (XEN) 000000007f6e3000 - 000000007f6f0000 (ACPI data) (XEN) 000000007f6f0000 - 000000007f700000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 0000000100000000 (reserved) (XEN) System RAM: 2038MB (2087420kB) (XEN) ACPI: RSDP 000F7B80, 0014 (r0 IntelR) (XEN) ACPI: RSDT 7F6E3040, 0030 (r1 IntelR AWRDACPI 42302E31 AWRD 0) (XEN) ACPI: FACP 7F6E30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0) (XEN) ACPI: DSDT 7F6E3180, 4085 (r1 INTELR AWRDACPI 1000 MSFT 100000E) (XEN) ACPI: FACS 7F6E0000, 0040 (XEN) ACPI: MCFG 7F6E7380, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0) (XEN) ACPI: APIC 7F6E7280, 0090 (r1 IntelR AWRDACPI 42302E31 AWRD 0) (XEN) NUMA turned off (XEN) Faking a node at 0000000000000000-000000007f6e0000 (XEN) Xen heap: 9MB (9688kB) (XEN) Domain heap initialised (XEN) found SMP MP-table at 000f3a50 (XEN) DMI 2.3 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x408 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0] (XEN) ACPI: wakeup_vec[7f6e000c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 15:3 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) (XEN) Processor #1 15:3 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: IOAPIC (id[0x05] address[0xfec84400] gsi_base[24]) (XEN) IOAPIC[1]: apic_id 5, version 32, address 0xfec84400, GSI 24-47 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Initializing CPU#0 (XEN) Detected 3000.214 MHz processor. (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K (XEN) CPU: L2 cache: 1024K (XEN) CPU: Physical Processor ID: 0 (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#0. (XEN) CPU0: Intel P4/Xeon Extended MCE MSRs (12) available (XEN) CPU0: Thermal monitoring enabled (XEN) CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04 (XEN) Booting processor 1/1 eip 8c000 (XEN) Initializing CPU#1 (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K (XEN) CPU: L2 cache: 1024K (XEN) CPU: Physical Processor ID: 0 (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#1. (XEN) CPU1: Intel P4/Xeon Extended MCE MSRs (12) available (XEN) CPU1: Thermal monitoring enabled (XEN) CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04 (XEN) Total of 2 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) checking TSC synchronization across 2 CPUs: passed. (XEN) Platform timer is 3.579MHz ACPI PM Timer (XEN) Brought up 2 CPUs (XEN) I/O virtualisation disabled (XEN) ACPI sleep modes: S3 (XEN) MCA: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 32-bit, PAE, lsb (XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0x400000 -> 0x9e2000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 000000003c000000->000000003e000000 (253952 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0400000->c09e2000 (XEN) Init. ramdisk: c09e2000->c1139200 (XEN) Phys-Mach map: c113a000->c123a000 (XEN) Start info: c123a000->c123a474 (XEN) Page tables: c123b000->c124a000 (XEN) Boot stack: c124a000->c124b000 (XEN) TOTAL: c0000000->c1400000 (XEN) ENTRY ADDRESS: c0876000 (XEN) Dom0 has maximum 2 VCPUs (XEN) Scrubbing Free RAM: ..........done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 112kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... Reserving virtual address space above 0xf5800000 PAT disabled on Xen Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.29-rc3-tip (root@dom0test.localdomain) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #4 SMP We d Feb 4 23:09:16 EET 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009f400 (usable) Xen: 000000000009f400 - 0000000000100000 (reserved) Xen: 0000000000100000 - 000000000113a000 (usable) Xen: 000000000113a000 - 000000000123b000 (reserved) Xen: 000000000123b000 - 0000000040000000 (usable) Xen: 000000007f6e0000 - 000000007f6e3000 (ACPI NVS) Xen: 000000007f6e3000 - 000000007f6f0000 (ACPI data) Xen: 000000007f6f0000 - 000000007f700000 (reserved) Xen: 00000000e0000000 - 00000000f0000000 (reserved) Xen: 00000000fec00000 - 0000000100000000 (reserved) console [xenboot0] enabled DMI 2.3 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. last_pfn = 0x40000 max_arch_pfn = 0x1000000 RAMDISK: 009e2000 - 01139200 ACPI: RSDP 000F7B80, 0014 (r0 IntelR) ACPI: RSDT 7F6E3040, 0030 (r1 IntelR AWRDACPI 42302E31 AWRD 0) ACPI: FACP 7F6E30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0) FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT 7F6E3180, 4085 (r1 INTELR AWRDACPI 1000 MSFT 100000E) ACPI: FACS 7F6E0000, 0040 ACPI: MCFG 7F6E7380, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0) ACPI: APIC 7F6E7280, 0090 (r1 IntelR AWRDACPI 42302E31 AWRD 0) 472MB HIGHMEM available. 551MB LOWMEM available. mapped low ram: 0 - 227fe000 low ram: 00000000 - 227fe000 bootmap 00010000 - 00014500 (8 early reservations) ==> bootmem [0000000000 - 00227fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 00009e1148] TEXT DATA BSS ==> [0000400000 - 00009e1148] #4 [00009e2000 - 0001139200] RAMDISK ==> [00009e2000 - 0001139200] #5 [000123b000 - 000124a000] INIT_PG_TABLE ==> [000123b000 - 000124a000] #6 [0000100000 - 0000208000] PGTABLE ==> [0000100000 - 0000208000] #7 [0000010000 - 0000015000] BOOTMAP ==> [0000010000 - 0000015000] Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000227fe HighMem 0x000227fe -> 0x00040000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0000113a 0: 0x0000123b -> 0x00040000 ACPI: PM-Timer IO Port: 0x408 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: Unable to change apic_id! IOAPIC[0]: apic_id 255, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x05] address[0xfec84400] gsi_base[24]) IOAPIC[1]: apic_id 5, version 32, address 0xfec84400, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Enabling APIC mode: Flat. Using 2 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs (XEN) io_apic.c:2213: (XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1 (XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900 (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ! (XEN) io_apic.c:2213: (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1 (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900 (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ! Allocating PCI resources starting at 80000000 (gap: 7f700000:60900000) NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Allocating 40960 bytes of per cpu data Xen: using vcpu_info placement Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259725 Kernel command line: ro root=/dev/vg00/lv01 console=hvc0 earlyprintk=xen pci=nomsi Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 NR_IRQS:2304 nr_irqs:320 xen: allocated irq 9 for acpi 9 xen_allocate_pirq: returning irq 9 for gsi 9 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 3000.114 MHz processor. Console: colour VGA+ 80x25 console handover: boot [xenboot0] -> real [hvc0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between c1b39000 - c5b39000 software IO TLB at phys 0x1b39000 - 0x5b39000 Memory: 956344k/1048576k available (2953k kernel code, 89780k reserved, 1594k data, 420k init, 483336k highmem) virtual kernel memory layout: fixmap : 0xf5458000 - 0xf57ff000 (3740 kB) pkmap : 0xf5000000 - 0xf5200000 (2048 kB) vmalloc : 0xe2ffe000 - 0xf4ffe000 ( 288 MB) lowmem : 0xc0000000 - 0xe27fe000 ( 551 MB) .init : 0xc0876000 - 0xc08df000 ( 420 kB) .data : 0xc06e2439 - 0xc0870cf8 (1594 kB) .text : 0xc0400000 - 0xc06e2439 (2953 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 installing Xen timer for CPU 0 Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.22 BogoMIPS (lpj=3000114) Security Framework initialized SELinux: Initializing. Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. (XEN) traps.c:2171:d0 Domain attempted WRMSR 00000400 from 00000000:0000ffff to ffffffff:ffffffff. (XEN) traps.c:2171:d0 Domain attempted WRMSR 00000404 from 00000000:00018000 to ffffffff:ffffffff. (XEN) traps.c:2171:d0 Domain attempted WRMSR 00000408 from 00000000:00000080 to ffffffff:ffffffff. (XEN) traps.c:2171:d0 Domain attempted WRMSR 0000040c from 00000000:0000007e to ffffffff:ffffffff. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available (XEN) domain.c:507:d0 Attempt to change CR4 flags 00000660 -> 00000620 SMP alternatives: switching to UP code ACPI: Core revision 20081204 cpu 0 spinlock event irq 17 installing Xen timer for CPU 1 cpu 1 spinlock event irq 23 SMP alternatives: switching to SMP code (XEN) traps.c:2171:d0 Domain attempted WRMSR 00000400 from 00000000:0000ffff to ffffffff:ffffffff. (XEN) traps.c:2171:d0 Domain attempted WRMSR 00000404 from 00000000:00018000 to ffffffff:ffffffff. (XEN) traps.c:2171:d0 Domain attempted WRMSR 00000408 from 00000000:00000080 to ffffffff:ffffffff. (XEN) traps.c:2171:d0 Domain attempted WRMSR 0000040c from 00000000:0000007e to ffffffff:ffffffff. Initializing CPU#1 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available Brought up 2 CPUs net_namespace: 1064 bytes Booting paravirtualized kernel on Xen Xen version: 3.3.1 (preserve-AD) (dom0) Grant table initialized Time: 9:57:49 Date: 02/05/09 NET: Registered protocol family 16 xenbus_probe_init ok ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Interpreter enabled ACPI: (supports S0 S1 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0ca0-0caf pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:01:00.0: PXH quirk detected; SHPC device MSI disabled pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:04:00.0: PME# supported from D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:05:00.0: PME# supported from D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1e.0: transparent bridge ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 12 14 15) xen_balloon: Initialising balloon driver. SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Xen: Initializing Xen DMA ops Xen: Enabling DMA fallback to swiotlb HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered xen_allocate_pirq: returning irq 8 for gsi 8 xen_set_ioapic_routing: irq 8 gsi 8 vector 80 ioapic 0 pin 8 triggering 1 polarity 0 xen_allocate_pirq: returning irq 13 for gsi 13 xen_set_ioapic_routing: irq 13 gsi 13 vector 120 ioapic 0 pin 13 triggering 1 polarity 0 xen_allocate_pirq: returning irq 6 for gsi 6 xen_set_ioapic_routing: irq 6 gsi 6 vector 64 ioapic 0 pin 6 triggering 1 polarity 0 xen_allocate_pirq: returning irq 4 for gsi 4 xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4 triggering 1 polarity 0 (XEN) io_apic.c:2226: (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4 (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! xen_allocate_pirq: returning irq 3 for gsi 3 xen_set_ioapic_routing: irq 3 gsi 3 vector 48 ioapic 0 pin 3 triggering 1 polarity 0 xen_allocate_pirq: returning irq 7 for gsi 7 xen_set_ioapic_routing: irq 7 gsi 7 vector 72 ioapic 0 pin 7 triggering 1 polarity 0 xen_allocate_pirq: returning irq 12 for gsi 12 xen_set_ioapic_routing: irq 12 gsi 12 vector 112 ioapic 0 pin 12 triggering 1 polarity 0 xen_allocate_pirq: returning irq 1 for gsi 1 xen_set_ioapic_routing: irq 1 gsi 1 vector 40 ioapic 0 pin 1 triggering 1 polarity 0 pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0xb78-0xb7b has been reserved system 00:01: ioport range 0xf78-0xf7b has been reserved system 00:01: ioport range 0xa78-0xa7b has been reserved system 00:01: ioport range 0xe78-0xe7b has been reserved system 00:01: ioport range 0xbbc-0xbbf has been reserved system 00:01: ioport range 0xfbc-0xfbf has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x880-0x88f has been reserved system 00:01: ioport range 0xca8-0xcaf has been reserved system 00:0c: ioport range 0x400-0x4bf could not be reserved system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved system 00:0f: iomem range 0xf0000-0xf3fff could not be reserved system 00:0f: iomem range 0xf4000-0xf7fff could not be reserved system 00:0f: iomem range 0xf8000-0xfbfff could not be reserved system 00:0f: iomem range 0xfc000-0xfffff could not be reserved system 00:0f: iomem range 0x0-0xfffff could not be reserved system 00:0f: iomem range 0x0-0x9ffff could not be reserved system 00:0f: iomem range 0x100000-0xffffffff could not be reserved system 00:0f: iomem range 0xfec00000-0xfecfffff has been reserved system 00:0f: iomem range 0xfee00000-0xfeefffff has been reserved system 00:0f: iomem range 0xffb00000-0xffb7ffff has been reserved system 00:0f: iomem range 0xfff00000-0xffffffff has been reserved system 00:0f: iomem range 0xe0000-0xeffff could not be reserved pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 pci 0000:01:00.0: IO window: 0xc000-0xcfff pci 0000:01:00.0: MEM window: 0xd0000000-0xd00fffff pci 0000:01:00.0: PREFETCH window: 0x00000080000000-0x000000800fffff pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xc000-0xcfff pci 0000:00:01.0: MEM window: 0xd0000000-0xd01fffff pci 0000:00:01.0: PREFETCH window: 0x00000080000000-0x000000800fffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.2: IO window: disabled pci 0000:00:1c.2: MEM window: 0xd0200000-0xd02fffff pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.3: IO window: disabled pci 0000:00:1c.3: MEM window: 0xd0300000-0xd03fffff pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 pci 0000:00:1e.0: IO window: 0xd000-0xdfff pci 0000:00:1e.0: MEM window: 0xd0400000-0xd04fffff pci 0000:00:1e.0: PREFETCH window: 0x00000080100000-0x000000801fffff xen_set_ioapic_routing: irq 29 gsi 16 vector 160 ioapic 0 pin 16 triggering 0 polarity 1 pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29 xen: PCI device 0000:00:01.0 pin 1 -> irq 29 xen_allocate_pirq: returning irq 29 for gsi 16 xen_set_ioapic_routing: irq 29 gsi 16 vector 160 ioapic 0 pin 16 triggering 0 polarity 1 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29 xen: PCI device 0000:00:1c.0 pin 1 -> irq 29 xen_set_ioapic_routing: irq 30 gsi 18 vector 168 ioapic 0 pin 18 triggering 0 polarity 1 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 30 xen: PCI device 0000:00:1c.2 pin 3 -> irq 30 xen_set_ioapic_routing: irq 31 gsi 19 vector 176 ioapic 0 pin 19 triggering 0 polarity 1 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 31 xen: PCI device 0000:00:1c.3 pin 4 -> irq 31 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 7516k freed apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1233827872.582:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1118 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button (CM) [PWRB] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found xenbus_probe_backend_init bus registered ok xenbus_probe_frontend_init bus registered ok Event-channel device installed. ***blkif_init *** netif_init registering netback Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel E7221 (i915) Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled (XEN) irq.c:513:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'. (XEN) irq.c:513:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. (XEN) irq.c:513:d0 Cannot bind IRQ 0 to guest. In use by 'timer'. (XEN) irq.c:513:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'. (XEN) irq.c:513:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. (XEN) irq.c:513:d0 Cannot bind IRQ 0 to guest. In use by 'timer'. (XEN) irq.c:513:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'. (XEN) irq.c:513:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. (XEN) irq.c:513:d0 Cannot bind IRQ 0 to guest. In use by 'timer'. (XEN) irq.c:513:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'. (XEN) irq.c:513:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. (XEN) irq.c:513:d0 Cannot bind IRQ 0 to guest. In use by 'timer'. serial8250: ttyS1 at I/O 0x2f8 (irq = 7) is a 16550A 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci_init_one: ENTER xen_allocate_pirq: returning irq 31 for gsi 19 xen_set_ioapic_routing: irq 31 gsi 19 vector 176 ioapic 0 pin 19 triggering 0 polarity 1 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 31 xen: PCI device 0000:00:1f.2 pin 2 -> irq 31 ata_host_alloc: ENTER ata_port_alloc: ENTER ata_port_alloc: ENTER ata_port_alloc: ENTER ata_port_alloc: ENTER ahci_port_init: PORT_SCR_ERR 0x0 ahci_port_init: PORT_IRQ_STAT 0x0 ahci_port_init: PORT_SCR_ERR 0x0 ahci_port_init: PORT_IRQ_STAT 0x0 ahci_port_init: PORT_SCR_ERR 0x0 ahci_port_init: PORT_IRQ_STAT 0x0 ahci_port_init: PORT_SCR_ERR 0x0 ahci_port_init: PORT_IRQ_STAT 0x0 ahci_init_controller: HOST_CTL 0x80000000 ahci_init_controller: HOST_CTL 0x80000002 ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl IDE mode ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part __ata_port_freeze: ata4294967295 port frozen __ata_port_freeze: ata4294967295 port frozen __ata_port_freeze: ata4294967295 port frozen __ata_port_freeze: ata4294967295 port frozen ahci_interrupt: ENTER scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xd05c3000 port 0xd05c3100 irq 31 ata2: SATA max UDMA/133 abar m1024@0xd05c3000 port 0xd05c3180 irq 31 ata3: SATA max UDMA/133 abar m1024@0xd05c3000 port 0xd05c3200 irq 31 ata4: SATA max UDMA/133 abar m1024@0xd05c3000 port 0xd05c3280 irq 31 ata_host_register: probe begin ata_port_schedule_eh: port EH scheduled ata_scsi_error: ENTER ata_port_flush_task: ENTER ata_eh_link_autopsy: ENTER ata_eh_recover: ENTER __ata_port_freeze: ata1 port frozen ahci_hardreset: ENTER sata_link_hardreset: ENTER sata_link_hardreset: EXIT, rc=0 ahci_hardreset: EXIT, rc=0, class=0 ata_eh_thaw_port: ata1 port thawed ata_std_postreset: ENTER ata1: SATA link down (SStatus 0 SControl 300) ata_std_postreset: EXIT ata_eh_revalidate_and_attach: ENTER ata_eh_recover: EXIT, rc=0 ata_scsi_error: EXIT ata_port_schedule_eh: port EH scheduled ata_scsi_error: ENTER ata_port_flush_task: ENTER ata_eh_link_autopsy: ENTER ata_eh_recover: ENTER __ata_port_freeze: ata2 port frozen ahci_hardreset: ENTER sata_link_hardreset: ENTER sata_link_hardreset: EXIT, rc=0 ahci_hardreset: EXIT, rc=0, class=0 ata_eh_thaw_port: ata2 port thawed ata_std_postreset: ENTER ata2: SATA link down (SStatus 0 SControl 300) ata_std_postreset: EXIT ata_eh_revalidate_and_attach: ENTER ata_eh_recover: EXIT, rc=0 ata_scsi_error: EXIT ata_port_schedule_eh: port EH scheduled ata_scsi_error: ENTER ata_port_flush_task: ENTER ata_eh_link_autopsy: ENTER ata_eh_recover: ENTER __ata_port_freeze: ata3 port frozen ahci_hardreset: ENTER sata_link_hardreset: ENTER sata_link_hardreset: EXIT, rc=0 ahci_hardreset: EXIT, rc=0, class=0 ata_eh_thaw_port: ata3 port thawed ata_std_postreset: ENTER ata3: SATA link down (SStatus 0 SControl 300) ata_std_postreset: EXIT ata_eh_revalidate_and_attach: ENTER ata_eh_recover: EXIT, rc=0 ata_scsi_error: EXIT ata_port_schedule_eh: port EH scheduled ata_scsi_error: ENTER ata_port_flush_task: ENTER ata_eh_link_autopsy: ENTER ata_eh_recover: ENTER __ata_port_freeze: ata4 port frozen ahci_hardreset: ENTER sata_link_hardreset: ENTER sata_link_hardreset: EXIT, rc=0 ahci_hardreset: EXIT, rc=0, class=0 ata_eh_thaw_port: ata4 port thawed ata_std_postreset: ENTER ata4: SATA link down (SStatus 0 SControl 300) ata_std_postreset: EXIT ata_eh_revalidate_and_attach: ENTER ata_eh_recover: EXIT, rc=0 ata_scsi_error: EXIT ata_host_register: probe end piix_init: pci_register_driver xen_allocate_pirq: returning irq 30 for gsi 18 xen_set_ioapic_routing: irq 30 gsi 18 vector 168 ioapic 0 pin 18 triggering 0 polarity 1 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 30 xen: PCI device 0000:00:1f.1 pin 1 -> irq 30 ata_host_alloc: ENTER ata_port_alloc: ENTER ata_port_alloc: ENTER __ata_port_freeze: ata4294967295 port frozen __ata_port_freeze: ata4294967295 port frozen scsi4 : ata_piix scsi5 : ata_piix ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 ata_host_register: probe begin ata_port_schedule_eh: port EH scheduled ata_scsi_error: ENTER ata_port_flush_task: ENTER ata_eh_link_autopsy: ENTER ata_eh_recover: ENTER __ata_port_freeze: ata5 port frozen ata_sff_softreset: ENTER ata_sff_softreset: about to softreset, devmask=3 ata_bus_softreset: ata5: bus reset via SRST ata_dev_classify: found ATA device by sig ata_dev_classify: found ATA device by sig ata_sff_softreset: EXIT, classes[0]=1 [1]=9 ata_eh_thaw_port: ata5 port thawed ata_std_postreset: ENTER ata_std_postreset: EXIT ata_eh_revalidate_and_attach: ENTER ata5: ata_dev_select: ENTER, device 0, wait 1 ata_sff_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x0 ata_sff_tf_load: device 0xA0 ata_sff_exec_command: ata5: cmd 0xEC ata_sff_hsm_move: ata5: protocol 2 task_state 2 (dev_stat 0x58) ata_pio_sector: data read ata_sff_hsm_move: ata5: protocol 2 task_state 3 (dev_stat 0x50) ata_sff_hsm_move: ata5: dev 0 command complete, drv_stat 0x50 ata_port_flush_task: ENTER ata5: ata_dev_select: ENTER, device 0, wait 1 ata_sff_tf_load: hob: feat 0x0 nsect 0x0, lba 0x0 0x0 0x0 ata_sff_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x0 ata_sff_tf_load: device 0xE0 ata_sff_exec_command: ata5: cmd 0x27 ata_port_flush_task: ENTER __ata_port_freeze: ata5 port frozen ata5.00: qc timeout (cmd 0x27) ata5.00: failed to read native max address (err_mask=0x4) ata5.00: HPA support seems broken, skipping HPA handling ata_eh_revalidate_and_attach: EXIT rc=-5 __ata_port_freeze: ata5 port frozen ata_sff_softreset: ENTER ata_sff_softreset: about to softreset, devmask=3 ata_bus_softreset: ata5: bus reset via SRST ata_dev_classify: found ATA device by sig ata_dev_classify: found ATA device by sig ata_sff_softreset: EXIT, classes[0]=1 [1]=9 ata_eh_thaw_port: ata5 port thawed ata_std_postreset: ENTER ata_std_postreset: EXIT ata_eh_revalidate_and_attach: ENTER ata5: ata_dev_select: ENTER, device 0, wait 1 ata_sff_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x0 ata_sff_tf_load: device 0xA0 ata_sff_exec_command: ata5: cmd 0xEC ata_sff_hsm_move: ata5: protocol 2 task_state 2 (dev_stat 0x58) ata_pio_sector: data read ata_sff_hsm_move: ata5: protocol 2 task_state 3 (dev_stat 0x50) ata_sff_hsm_move: ata5: dev 0 command complete, drv_stat 0x50 ata_port_flush_task: ENTER ata_dump_id: 49==0x2f00 53==0x0007 63==0x0007 64==0x0003 75==0x0000 ata_dump_id: 80==0x007e 81==0x001b 82==0x346b 83==0x7d01 84==0x4003 ata_dump_id: 88==0x203f 93==0x604b ata_dev_set_xfermode: set features - xfer mode ata5: ata_dev_select: ENTER, device 0, wait 1 ata_sff_tf_load: feat 0x3 nsect 0x45 lba 0x0 0x0 0x0 ata_sff_tf_load: device 0xA0 ata_sff_exec_command: ata5: cmd 0xEF ata_sff_hsm_move: ata5: protocol 1 task_state 3 (dev_stat 0x50) ata_sff_hsm_move: ata5: dev 0 command complete, drv_stat 0x50 ata_port_flush_task: ENTER ata_dev_set_xfermode: EXIT, err_mask=0 ata5: ata_dev_select: ENTER, device 0, wait 1 ata_sff_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x0 ata_sff_tf_load: device 0xA0 ata_sff_exec_command: ata5: cmd 0xEC ata_sff_hsm_move: ata5: protocol 2 task_state 2 (dev_stat 0x58) ata_pio_sector: data read ata_sff_hsm_move: ata5: protocol 2 task_state 3 (dev_stat 0x50) ata_sff_hsm_move: ata5: dev 0 command complete, drv_stat 0x50 ata_port_flush_task: ENTER ata_dump_id: 49==0x2f00 53==0x0007 63==0x0007 64==0x0003 75==0x0000 ata_dump_id: 80==0x007e 81==0x001b 82==0x346b 83==0x7d01 84==0x4003 ata_dump_id: 88==0x203f 93==0x604b ata_dev_set_mode: xfer_shift=12, xfer_mode=0x45 ata5.00: configured for UDMA/100 ata_eh_recover: EXIT, rc=0 ata_eh_link_autopsy: ENTER ata_eh_link_autopsy: EXIT ata_eh_recover: ENTER ata_eh_revalidate_and_attach: ENTER ata_eh_recover: EXIT, rc=0 ata_scsi_error: EXIT ata_scsi_dump_cdb: CDB (5:0,0,0) 12 00 00 00 24 00 00 00 00 ata_scsiop_inq_std: ENTER ata_scsi_dump_cdb: CDB (5:0,0,0) 12 00 00 00 60 00 00 00 00 ata_scsiop_inq_std: ENTER scsi 4:0:0:0: Direct-Access ATA ST3120022A 3.06 PQ: 0 ANSI: 5 ata_scsi_dump_cdb: CDB (5:0,0,0) 00 00 00 00 00 00 00 00 00 ata_scsiop_noop: ENTER ata_scsi_dump_cdb: CDB (5:0,0,0) 25 00 00 00 00 00 00 00 00 ata_scsiop_read_cap: ENTER sd 4:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) ata_scsi_dump_cdb: CDB (5:0,0,0) 5a 00 3f 00 00 00 00 00 08 ata_scsiop_mode_sense: ENTER sd 4:0:0:0: [sda] Write Protect is off ata_scsi_dump_cdb: CDB (5:0,0,0) 5a 00 08 00 00 00 00 00 08 ata_scsiop_mode_sense: ENTER ata_scsi_dump_cdb: CDB (5:0,0,0) 5a 00 08 00 00 00 00 00 24 ata_scsiop_mode_sense: ENTER sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata_scsi_dump_cdb: CDB (5:0,0,0) 00 00 00 00 00 00 00 00 00 ata_scsiop_noop: ENTER ata_scsi_dump_cdb: CDB (5:0,0,0) 25 00 00 00 00 00 00 00 00 ata_scsiop_read_cap: ENTER sd 4:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) ata_scsi_dump_cdb: CDB (5:0,0,0) 5a 00 3f 00 00 00 00 00 08 ata_scsiop_mode_sense: ENTER sd 4:0:0:0: [sda] Write Protect is off ata_scsi_dump_cdb: CDB (5:0,0,0) 5a 00 08 00 00 00 00 00 08 ata_scsiop_mode_sense: ENTER ata_scsi_dump_cdb: CDB (5:0,0,0) 5a 00 08 00 00 00 00 00 24 ata_scsiop_mode_sense: ENTER sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<3>ata_scsi_dump_cdb: CDB (5:0,0,0) 28 00 00 00 00 00 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata5 ata_sg_setup: 1 sg elements mapped ata_fill_sg: PRD[0] = (0x5F598000, 0x1000) ata5: ata_dev_select: ENTER, device 0, wait 1 ata_sff_tf_load: feat 0x0 nsect 0x8 lba 0x0 0x0 0x0 ata_sff_tf_load: device 0xE0 ata_sff_exec_command: ata5: cmd 0xC8 ata_scsi_translate: EXIT ata_scsi_timed_out: ENTER ata_scsi_timed_out: EXIT, ret=0 ata_scsi_error: ENTER ata_port_flush_task: ENTER __ata_port_freeze: ata5 port frozen ata_eh_link_autopsy: ENTER ata_eh_link_autopsy: EXIT ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: status: { DRDY } ata_eh_recover: ENTER __ata_port_freeze: ata5 port frozen ata5: soft resetting link ata_sff_softreset: ENTER ata_sff_softreset: about to softreset, devmask=3 ata_bus_softreset: ata5: bus reset via SRST ata_dev_classify: found ATA device by sig ata_dev_classify: found ATA device by sig ata_sff_softreset: EXIT, classes[0]=1 [1]=9 ata_eh_thaw_port: ata5 port thawed ata_std_postreset: ENTER ata_std_postreset: EXIT ata_eh_revalidate_and_attach: ENTER ata5: ata_dev_select: ENTER, device 0, wait 1 ata_sff_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x0 ata_sff_tf_load: device 0xA0 ata_sff_exec_command: ata5: cmd 0xEC ata_sff_hsm_move: ata5: protocol 2 task_state 2 (dev_stat 0x58) ata_pio_sector: data read ata_sff_hsm_move: ata5: protocol 2 task_state 3 (dev_stat 0x50) ata_sff_hsm_move: ata5: dev 0 command complete, drv_stat 0x50 ata_port_flush_task: ENTER ata_dump_id: 49==0x2f00 53==0x0007 63==0x0007 64==0x0003 75==0x0000 ata_dump_id: 80==0x007e 81==0x001b 82==0x346b 83==0x7d01 84==0x4003 ata_dump_id: 88==0x203f 93==0x604b ata_dev_set_xfermode: set features - xfer mode ata5: ata_dev_select: ENTER, device 0, wait 1 ata_sff_tf_load: feat 0x3 nsect 0x45 lba 0x0 0x0 0x0 ata_sff_tf_load: device 0xA0 ata_sff_exec_command: ata5: cmd 0xEF ata_sff_hsm_move: ata5: protocol 1 task_state 3 (dev_stat 0x50) ata_sff_hsm_move: ata5: dev 0 command complete, drv_stat 0x50 ata_port_flush_task: ENTER ata_dev_set_xfermode: EXIT, err_mask=0 ata5: ata_dev_select: ENTER, device 0, wait 1 ata_sff_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x0 ata_sff_tf_load: device 0xA0 ata_sff_exec_command: ata5: cmd 0xEC ata_sff_hsm_move: ata5: protocol 2 task_state 2 (dev_stat 0x58) ata_pio_sector: data read ata_sff_hsm_move: ata5: protocol 2 task_state 3 (dev_stat 0x50) ata_sff_hsm_move: ata5: dev 0 command complete, drv_stat 0x50 ata_port_flush_task: ENTER ata_dump_id: 49==0x2f00 53==0x0007 63==0x0007 64==0x0003 75==0x0000 ata_dump_id: 80==0x007e 81==0x001b 82==0x346b 83==0x7d01 84==0x4003 ata_dump_id: 88==0x203f 93==0x604b ata_dev_set_mode: xfer_shift=12, xfer_mode=0x45 ata5.00: configured for UDMA/100 ata_eh_recover: EXIT, rc=0 ata_sg_clean: unmapping 1 sg elements ata5: EH complete ata_scsi_error: EXIT ata_scsi_dump_cdb: CDB (5:0,0,0) 28 00 00 00 00 00 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata5 ata_sg_setup: 1 sg elements mapped ata_fill_sg: PRD[0] = (0x5F598000, 0x1000) ata5: ata_dev_select: ENTER, device 0, wait 1 ata_sff_tf_load: feat 0x0 nsect 0x8 lba 0x0 0x0 0x0 ata_sff_tf_load: device 0xE0 ata_sff_exec_command: ata5: cmd 0xC8 ata_scsi_translate: EXIT ata_scsi_timed_out: ENTER ata_scsi_timed_out: EXIT, ret=0 ata_scsi_error: ENTER ata_port_flush_task: ENTER __ata_port_freeze: ata5 port frozen ata_eh_link_autopsy: ENTER ata5.00: limiting speed to UDMA/66:PIO4 ata_eh_link_autopsy: EXIT ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: status: { DRDY } ata_eh_recover: ENTER __ata_port_freeze: ata5 port frozen ata5: soft resetting link ata_sff_softreset: ENTER ata_sff_softreset: about to softreset, devmask=3 ata_bus_softreset: ata5: bus reset via SRST ata_dev_classify: found ATA device by sig ata_dev_classify: found ATA device by sig ata_sff_softreset: EXIT, classes[0]=1 [1]=9 ata_eh_thaw_port: ata5 port thawed ata_std_postreset: ENTER ata_std_postreset: EXIT ata_eh_revalidate_and_attach: ENTER ata5: ata_dev_select: ENTER, device 0, wait 1 ata_sff_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x0 ata_sff_tf_load: device 0xA0 ata_sff_exec_command: ata5: cmd 0xEC ata_sff_hsm_move: ata5: protocol 2 task_state 2 (dev_stat 0x58) ata_pio_sector: data read ata_sff_hsm_move: ata5: protocol 2 task_state 3 (dev_stat 0x50) ata_sff_hsm_move: ata5: dev 0 command complete, drv_stat 0x50 ata_port_flush_task: ENTER ata_dump_id: 49==0x2f00 53==0x0007 63==0x0007 64==0x0003 75==0x0000 ata_dump_id: 80==0x007e 81==0x001b 82==0x346b 83==0x7d01 84==0x4003 ata_dump_id: 88==0x203f 93==0x604b ata_dev_set_xfermode: set features - xfer mode ata5: ata_dev_select: ENTER, device 0, wait 1 ata_sff_tf_load: feat 0x3 nsect 0x44 lba 0x0 0x0 0x0 ata_sff_tf_load: device 0xA0 ata_sff_exec_command: ata5: cmd 0xEF ata_sff_hsm_move: ata5: protocol 1 task_state 3 (dev_stat 0x50) ata_sff_hsm_move: ata5: dev 0 command complete, drv_stat 0x50 ata_port_flush_task: ENTER ata_dev_set_xfermode: EXIT, err_mask=0 ata5: ata_dev_select: ENTER, device 0, wait 1 ata_sff_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x0 ata_sff_tf_load: device 0xA0 ata_sff_exec_command: ata5: cmd 0xEC ata_sff_hsm_move: ata5: protocol 2 task_state 2 (dev_stat 0x58) ata_pio_sector: data read ata_sff_hsm_move: ata5: protocol 2 task_state 3 (dev_stat 0x50) ata_sff_hsm_move: ata5: dev 0 command complete, drv_stat 0x50 ata_port_flush_task: ENTER ata_dump_id: 49==0x2f00 53==0x0007 63==0x0007 64==0x0003 75==0x0000 ata_dump_id: 80==0x007e 81==0x001b 82==0x346b 83==0x7d01 84==0x4003 ata_dump_id: 88==0x103f 93==0x604b ata_dev_set_mode: xfer_shift=12, xfer_mode=0x44 ata5.00: configured for UDMA/66 ata_eh_recover: EXIT, rc=0 ata_sg_clean: unmapping 1 sg elements ata5: EH complete ata_scsi_error: EXIT ata_scsi_dump_cdb: CDB (5:0,0,0) 28 00 00 00 00 00 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata5 ata_sg_setup: 1 sg elements mapped ata_fill_sg: PRD[0] = (0x5F598000, 0x1000) ata5: ata_dev_select: ENTER, device 0, wait 1 ata_sff_tf_load: feat 0x0 nsect 0x8 lba 0x0 0x0 0x0 ata_sff_tf_load: device 0xE0 ata_sff_exec_command: ata5: cmd 0xC8 ata_scsi_translate: EXIT ata_scsi_timed_out: ENTER ata_scsi_timed_out: EXIT, ret=0 ata_scsi_error: ENTER ata_port_flush_task: ENTER __ata_port_freeze: ata5 port frozen ata_eh_link_autopsy: ENTER ata5.00: limiting speed to UDMA/33:PIO4 ata_eh_link_autopsy: EXIT ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: status: { DRDY } ata_eh_recover: ENTER __ata_port_freeze: ata5 port frozen ata5: soft resetting link ata_sff_softreset: ENTER ata_sff_softreset: about to softreset, devmask=3 ata_bus_softreset: ata5: bus reset via SRST ata_dev_classify: found ATA device by sig ata_dev_classify: found ATA device by sig ata_sff_softreset: EXIT, classes[0]=1 [1]=9 ata_eh_thaw_port: ata5 port thawed ata_std_postreset: ENTER ata_std_postreset: EXIT ata_eh_revalidate_and_attach: ENTER ata5: ata_dev_select: ENTER, device 0, wait 1 ata_sff_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x0 ata_sff_tf_load: device 0xA0 ata_sff_exec_command: ata5: cmd 0xEC ata_sff_hsm_move: ata5: protocol 2 task_state 2 (dev_stat 0x58) ata_pio_sector: data read ata_sff_hsm_move: ata5: protocol 2 task_state 3 (dev_stat 0x50) ata_sff_hsm_move: ata5: dev 0 command complete, drv_stat 0x50 ata_port_flush_task: ENTER ata_dump_id: 49==0x2f00 53==0x0007 63==0x0007 64==0x0003 75==0x0000 ata_dump_id: 80==0x007e 81==0x001b 82==0x346b 83==0x7d01 84==0x4003 ata_dump_id: 88==0x103f 93==0x604b ata_dev_set_xfermode: set features - xfer mode ata5: ata_dev_select: ENTER, device 0, wait 1 ata_sff_tf_load: feat 0x3 nsect 0x42 lba 0x0 0x0 0x0 ata_sff_tf_load: device 0xA0 ata_sff_exec_command: ata5: cmd 0xEF ata_sff_hsm_move: ata5: protocol 1 task_state 3 (dev_stat 0x50) ata_sff_hsm_move: ata5: dev 0 command complete, drv_stat 0x50 ata_port_flush_task: ENTER ata_dev_set_xfermode: EXIT, err_mask=0 ata5: ata_dev_select: ENTER, device 0, wait 1 ata_sff_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x0 ata_sff_tf_load: device 0xA0 ata_sff_exec_command: ata5: cmd 0xEC ata_sff_hsm_move: ata5: protocol 2 task_state 2 (dev_stat 0x58) ata_pio_sector: data read ata_sff_hsm_move: ata5: protocol 2 task_state 3 (dev_stat 0x50) ata_sff_hsm_move: ata5: dev 0 command complete, drv_stat 0x50 ata_port_flush_task: ENTER ata_dump_id: 49==0x2f00 53==0x0007 63==0x0007 64==0x0003 75==0x0000 ata_dump_id: 80==0x007e 81==0x001b 82==0x346b 83==0x7d01 84==0x4003 ata_dump_id: 88==0x043f 93==0x604b ata_dev_set_mode: xfer_shift=12, xfer_mode=0x42 ata5.00: configured for UDMA/33 ata_eh_recover: EXIT, rc=0 ata_sg_clean: unmapping 1 sg elements ata5: EH complete ata_scsi_error: EXIT ata_scsi_dump_cdb: CDB (5:0,0,0) 28 00 00 00 00 00 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata5 ata_sg_setup: 1 sg elements mapped ata_fill_sg: PRD[0] = (0x5F598000, 0x1000) ata5: ata_dev_select: ENTER, device 0, wait 1 ata_sff_tf_load: feat 0x0 nsect 0x8 lba 0x0 0x0 0x0 ata_sff_tf_load: device 0xE0 ata_sff_exec_command: ata5: cmd 0xC8 ata_scsi_translate: EXIT ata_scsi_timed_out: ENTER ata_scsi_timed_out: EXIT, ret=0 ata_scsi_error: ENTER ata_port_flush_task: ENTER __ata_port_freeze: ata5 port frozen ata_eh_link_autopsy: ENTER ata5.00: limiting speed to PIO4 ata_eh_link_autopsy: EXIT ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: status: { DRDY } ata_eh_recover: ENTER __ata_port_freeze: ata5 port frozen ata5: soft resetting link ata_sff_softreset: ENTER ata_sff_softreset: about to softreset, devmask=3 ata_bus_softreset: ata5: bus reset via SRST ata_dev_classify: found ATA device by sig ata_dev_classify: found ATA device by sig ata_sff_softreset: EXIT, classes[0]=1 [1]=9 ata_eh_thaw_port: ata5 port thawed ata_std_postreset: ENTER ata_std_postreset: EXIT ata_eh_revalidate_and_attach: ENTER ata5: ata_dev_select: ENTER, device 0, wait 1 ata_sff_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x0 ata_sff_tf_load: device 0xA0 ata_sff_exec_command: ata5: cmd 0xEC ata_sff_hsm_move: ata5: protocol 2 task_state 2 (dev_stat 0x58) ata_pio_sector: data read ata_sff_hsm_move: ata5: protocol 2 task_state 3 (dev_stat 0x50) ata_sff_hsm_move: ata5: dev 0 command complete, drv_stat 0x50 ata_port_flush_task: ENTER ata_dump_id: 49==0x2f00 53==0x0007 63==0x0007 64==0x0003 75==0x0000 ata_dump_id: 80==0x007e 81==0x001b 82==0x346b 83==0x7d01 84==0x4003 ata_dump_id: 88==0x043f 93==0x604b ata_dev_set_xfermode: set features - xfer mode ata5: ata_dev_select: ENTER, device 0, wait 1 ata_sff_tf_load: feat 0x3 nsect 0xC lba 0x0 0x0 0x0 ata_sff_tf_load: device 0xA0 ata_sff_exec_command: ata5: cmd 0xEF ata_sff_hsm_move: ata5: protocol 1 task_state 3 (dev_stat 0x50) ata_sff_hsm_move: ata5: dev 0 command complete, drv_stat 0x50 ata_port_flush_task: ENTER ata_dev_set_xfermode: EXIT, err_mask=0 ata5: ata_dev_select: ENTER, device 0, wait 1 ata_sff_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x0 ata_sff_tf_load: device 0xA0 ata_sff_exec_command: ata5: cmd 0xEC ata_sff_hsm_move: ata5: protocol 2 task_state 2 (dev_stat 0x58) ata_pio_sector: data read ata_sff_hsm_move: ata5: protocol 2 task_state 3 (dev_stat 0x50) ata_sff_hsm_move: ata5: dev 0 command complete, drv_stat 0x50 ata_port_flush_task: ENTER ata_dump_id: 49==0x2f00 53==0x0007 63==0x0007 64==0x0003 75==0x0000 ata_dump_id: 80==0x007e 81==0x001b 82==0x346b 83==0x7d01 84==0x4003 ata_dump_id: 88==0x043f 93==0x604b ata_dev_set_mode: xfer_shift=0, xfer_mode=0xc ata5.00: configured for PIO4 ata_eh_recover: EXIT, rc=0 ata_sg_clean: unmapping 1 sg elements ata5: EH complete ata_scsi_error: EXIT ata_scsi_dump_cdb: CDB (5:0,0,0) 28 00 00 00 00 00 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata5: ata_dev_select: ENTER, device 0, wait 1 ata_sff_tf_load: feat 0x0 nsect 0x8 lba 0x0 0x0 0x0 ata_sff_tf_load: device 0xE0 ata_sff_exec_command: ata5: cmd 0xC4 ata_scsi_translate: EXIT