Reserving virtual address space above 0xf5800000 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32.27 (root@dom0test.localdomain) (gcc version 4.4.3 20100127 (Red Hat 4.4.3-4) (GCC) ) #6 SMP Sat Jan 15 05:53:16 EET 2011 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC released 0 pages of unused memory BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009f400 (usable) Xen: 000000000009f400 - 0000000000100000 (reserved) Xen: 0000000000100000 - 0000000040000000 (usable) Xen: 000000007f6e0000 - 000000007f6e3000 (ACPI NVS) Xen: 000000007f6e3000 - 000000007f6f0000 (ACPI data) Xen: 000000007f6f0000 - 000000007f700000 (reserved) Xen: 00000000e0000000 - 00000000f0000000 (reserved) Xen: 00000000fec00000 - 0000000100000000 (reserved) Xen: 0000000100000000 - 000000013f6e0000 (usable) DMI 2.3 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x13f6e0 max_arch_pfn = 0x1000000 x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 initial memory mapped : 0 - 01fff000 init_memory_mapping: 0000000000000000-000000002d1fe000 0000000000 - 002d1fe000 page 4k kernel direct mapping tables up to 2d1fe000 @ 100000-26d000 RAMDISK: 00b08000 - 012e2600 ACPI: RSDP 000f7b80 00014 (v00 IntelR) ACPI: RSDT 7f6e3040 00030 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) ACPI: FACP 7f6e30c0 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) ACPI: DSDT 7f6e3180 04085 (v01 INTELR AWRDACPI 00001000 MSFT 0100000E) ACPI: FACS 7f6e0000 00040 ACPI: MCFG 7f6e7380 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) ACPI: APIC 7f6e7280 00090 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) ACPI: Local APIC address 0xfee00000 4388MB HIGHMEM available. 721MB LOWMEM available. mapped low ram: 0 - 2d1fe000 low ram: 0 - 2d1fe000 node 0 low ram: 00000000 - 2d1fe000 node 0 bootmap 00010000 - 00015a40 (11 early reservations) ==> bootmem [0000000000 - 002d1fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [00013e4000 - 00013f5000] XEN PAGETABLES ==> [00013e4000 - 00013f5000] #2 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #3 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #4 [0000400000 - 00009971b4] TEXT DATA BSS ==> [0000400000 - 00009971b4] #5 [0000b08000 - 00012e2600] RAMDISK ==> [0000b08000 - 00012e2600] #6 [00012e3000 - 00013e4000] XEN START INFO ==> [00012e3000 - 00013e4000] #7 [0100000000 - 013f6e0000] XEN EXTRA #8 [0000998000 - 00009a50f8] BRK ==> [0000998000 - 00009a50f8] #9 [0000100000 - 000025a000] PGTABLE ==> [0000100000 - 000025a000] #10 [0000010000 - 0000016000] BOOTMAP ==> [0000010000 - 0000016000] found SMP MP-table at [c00f3a50] f3a50 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x0002d1fe HighMem 0x0002d1fe -> 0x0013f6e0 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x00040000 0: 0x00100000 -> 0x0013f6e0 On node 0 totalpages: 521839 free_area_init_node: node 0, pgdat c0882f00, node_mem_map c13f6200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1412 pages used for memmap Normal zone: 179322 pages, LIFO batch:31 HighMem zone: 8778 pages used for memmap HighMem zone: 328344 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-0 ACPI: IOAPIC (id[0x05] address[0xfec84400] gsi_base[24]) IOAPIC[1]: apic_id 5, version 0, address 0xfec84400, GSI 24-24 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ERROR: Unable to locate IOAPIC for GSI 2 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ERROR: Unable to locate IOAPIC for GSI 9 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 280 Allocating PCI resources starting at 7f700000 (gap: 7f700000:60900000) Booting paravirtualized kernel on Xen Xen version: 4.0.2-rc1 (preserve-AD) (dom0) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 16 pages/cpu @c3bf8000 s42264 r0 d23272 u65536 pcpu-alloc: s42264 r0 d23272 u65536 alloc=16*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511617 Kernel command line: ro root=/dev/mapper/vg_dom0test-lv01 nomodeset PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 DMA: Placing 64MB software IO TLB between c3cdd000 - c7cdd000 DMA: software IO TLB at phys 0x3cdd000 - 0x7cdd000 xen_swiotlb_fixup: buf=c3cdd000 size=67108864 xen_swiotlb_fixup: buf=c7d3d000 size=32768 Initializing HighMem for node 0 (0002d1fe:0013f6e0) Memory: 923112k/5233536k available (2994k kernel code, 124164k reserved, 1654k data, 472k init, 1348488k highmem) virtual kernel memory layout: fixmap : 0xf567e000 - 0xf57ff000 (1540 kB) pkmap : 0xf5200000 - 0xf5400000 (2048 kB) vmalloc : 0xed9fe000 - 0xf51fe000 ( 120 MB) lowmem : 0xc0000000 - 0xed1fe000 ( 721 MB) .init : 0xc088b000 - 0xc0901000 ( 472 kB) .data : 0xc06ec8d4 - 0xc088a1c0 (1654 kB) .text : 0xc0400000 - 0xc06ec8d4 (2994 kB) SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:2304 nr_irqs:768 CPU 0 irqstacks, hard=c3bf8000 soft=c3bf9000 xen: --> irq=0 xen: --> irq=1 xen: --> irq=2 xen: --> irq=3 xen: --> irq=4 xen: --> irq=5 xen: --> irq=6 xen: --> irq=7 xen: --> irq=8 xen: --> irq=9 xen: --> irq=10 xen: --> irq=11 xen: --> irq=12 xen: --> irq=13 xen: --> irq=14 xen: --> irq=15 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 xen: registering gsi 9 triggering 0 polarity 0 xen_allocate_pirq: returning irq 9 for gsi 9 xen: --> irq=9 xen: acpi sci 9 Console: colour VGA+ 80x25 console [tty0] enabled Xen: using vcpuop timer interface installing Xen timer for CPU 0 alloc irq_desc for 767 on node -1 alloc kstat_irqs on node -1 Detected 3000.300 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.60 BogoMIPS (lpj=3000300) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 4 MCE banks Performance Events: no PMU driver, software events only. SMP alternatives: switching to UP code ACPI: Core revision 20090903 alloc irq_desc for 766 on node -1 alloc kstat_irqs on node -1 cpu 0 spinlock event irq 766 alloc irq_desc for 765 on node -1 alloc kstat_irqs on node -1 alloc irq_desc for 764 on node -1 alloc kstat_irqs on node -1 alloc irq_desc for 763 on node -1 alloc kstat_irqs on node -1 alloc irq_desc for 762 on node -1 alloc kstat_irqs on node -1 CPU 1 irqstacks, hard=c3c08000 soft=c3c09000 installing Xen timer for CPU 1 alloc irq_desc for 761 on node -1 alloc kstat_irqs on node -1 alloc irq_desc for 760 on node -1 alloc kstat_irqs on node -1 cpu 1 spinlock event irq 760 SMP alternatives: switching to SMP code alloc irq_desc for 759 on node -1 alloc kstat_irqs on node -1 alloc irq_desc for 758 on node -1 alloc kstat_irqs on node -1 alloc irq_desc for 757 on node -1 alloc kstat_irqs on node -1 alloc irq_desc for 756 on node -1 alloc kstat_irqs on node -1 Initializing CPU#1 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Brought up 2 CPUs CPU0 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 0 (cpu_power = 589) 1 (cpu_power = 589) domain 1: span 0-1 level MC groups: 0-1 (cpu_power = 1178) CPU1 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 1 (cpu_power = 589) 0 (cpu_power = 589) domain 1: span 0-1 level MC groups: 0-1 (cpu_power = 1178) Grant table initialized Time: 7:09:25 Date: 01/15/11 NET: Registered protocol family 16 alloc irq_desc for 755 on node -1 alloc kstat_irqs on node -1 ACPI: bus type pci registered sync cpu 0 get result 1 max_id 1 sync cpu 1 get result 1 max_id 1 alloc irq_desc for 754 on node -1 alloc kstat_irqs on node -1 PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ERROR: Unable to locate IOAPIC for GSI 9 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: reg 10 32bit mmio: [0xd0500000-0xd057ffff] pci 0000:00:02.0: reg 14 io port: [0xe400-0xe407] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xc0000000-0xcfffffff] pci 0000:00:02.0: reg 1c 32bit mmio: [0xd0580000-0xd05bffff] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xe000-0xe01f] pci 0000:00:1d.1: reg 20 io port: [0xe100-0xe11f] pci 0000:00:1d.2: reg 20 io port: [0xe200-0xe21f] pci 0000:00:1d.3: reg 20 io port: [0xe300-0xe31f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd05c0000-0xd05c03ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0ca0-0caf pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0xf000-0xf00f] pci 0000:00:1f.2: reg 10 io port: [0xe900-0xe907] pci 0000:00:1f.2: reg 14 io port: [0xea00-0xea03] pci 0000:00:1f.2: reg 18 io port: [0xeb00-0xeb07] pci 0000:00:1f.2: reg 1c io port: [0xec00-0xec03] pci 0000:00:1f.2: reg 20 io port: [0xed00-0xed0f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd05c3000-0xd05c33ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] pci 0000:01:00.0: PXH quirk detected; SHPC device MSI disabled pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:01:00.1: reg 10 32bit mmio: [0xd0100000-0xd0100fff] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd01fffff] pci 0000:02:01.0: reg 10 io port: [0xc000-0xc07f] pci 0000:02:01.0: reg 18 io port: [0xc100-0xc1ff] pci 0000:02:01.0: reg 1c 32bit mmio: [0xd0030000-0xd0030fff] pci 0000:02:01.0: reg 20 32bit mmio: [0xd0000000-0xd001ffff] pci 0000:02:01.0: reg 30 32bit mmio pref: [0x000000-0x007fff] pci 0000:02:01.0: supports D1 pci 0000:01:00.0: bridge io port: [0xc000-0xcfff] pci 0000:01:00.0: bridge 32bit mmio: [0xd0000000-0xd00fffff] pci 0000:04:00.0: reg 10 64bit mmio: [0xd0200000-0xd020ffff] pci 0000:04:00.0: PME# supported from D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.2: bridge 32bit mmio: [0xd0200000-0xd02fffff] pci 0000:05:00.0: reg 10 64bit mmio: [0xd0300000-0xd030ffff] pci 0000:05:00.0: PME# supported from D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.3: bridge 32bit mmio: [0xd0300000-0xd03fffff] pci 0000:06:01.0: reg 10 io port: [0xd000-0xd007] pci 0000:06:01.0: reg 14 io port: [0xd100-0xd103] pci 0000:06:01.0: reg 18 io port: [0xd200-0xd207] pci 0000:06:01.0: reg 1c io port: [0xd300-0xd303] pci 0000:06:01.0: reg 20 io port: [0xd400-0xd40f] pci 0000:06:01.0: reg 24 32bit mmio: [0xd0410000-0xd0413fff] pci 0000:06:01.0: reg 30 32bit mmio pref: [0x000000-0x003fff] pci 0000:06:01.0: supports D1 pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0400000-0xd04fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P1AB.PXHA._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 12 14 15) xen_balloon: Initialising balloon driver with page order 0. last_pfn = 0x13f6e0 max_arch_pfn = 0x1000000 vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource xen pnp: PnP ACPI init ACPI: bus type pnp registered xen: registering gsi 8 triggering 1 polarity 0 xen_allocate_pirq: returning irq 8 for gsi 8 xen: --> irq=8 xen: registering gsi 13 triggering 1 polarity 0 xen_allocate_pirq: returning irq 13 for gsi 13 xen: --> irq=13 xen: registering gsi 6 triggering 1 polarity 0 xen_allocate_pirq: returning irq 6 for gsi 6 xen: --> irq=6 xen: registering gsi 4 triggering 1 polarity 0 xen_allocate_pirq: returning irq 4 for gsi 4 xen: --> irq=4 xen: registering gsi 3 triggering 1 polarity 0 xen_allocate_pirq: returning irq 3 for gsi 3 xen: --> irq=3 xen: registering gsi 7 triggering 1 polarity 0 xen_allocate_pirq: returning irq 7 for gsi 7 xen: --> irq=7 pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0xb78-0xb7b has been reserved system 00:01: ioport range 0xf78-0xf7b has been reserved system 00:01: ioport range 0xa78-0xa7b has been reserved system 00:01: ioport range 0xe78-0xe7b has been reserved system 00:01: ioport range 0xbbc-0xbbf has been reserved system 00:01: ioport range 0xfbc-0xfbf has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x880-0x88f has been reserved system 00:01: ioport range 0xca8-0xcaf has been reserved system 00:0a: ioport range 0x400-0x4bf could not be reserved system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved system 00:0d: iomem range 0xc9400-0xcbfff could not be reserved system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved system 00:0d: iomem range 0xfc000-0xfffff could not be reserved system 00:0d: iomem range 0x7f6e0000-0x7f6fffff could not be reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0x100000-0x7f6dffff could not be reserved system 00:0d: iomem range 0xfec00000-0xfecfffff could not be reserved system 00:0d: iomem range 0xfee00000-0xfeefffff has been reserved system 00:0d: iomem range 0xffb00000-0xffb7ffff has been reserved system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved system 00:0d: iomem range 0xe0000-0xeffff could not be reserved PM-Timer failed consistency check (0x0xffffff) - aborting. pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 pci 0000:01:00.0: IO window: 0xc000-0xcfff pci 0000:01:00.0: MEM window: 0xd0000000-0xd00fffff pci 0000:01:00.0: PREFETCH window: 0x7f700000-0x7f7fffff pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xc000-0xcfff pci 0000:00:01.0: MEM window: 0xd0000000-0xd01fffff pci 0000:00:01.0: PREFETCH window: 0x7f700000-0x7f7fffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.0: IO window: 0x1000-0x1fff pci 0000:00:1c.0: MEM window: 0x7f800000-0x7f9fffff pci 0000:00:1c.0: PREFETCH window: 0x0000007fa00000-0x0000007fbfffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.2: IO window: 0x2000-0x2fff pci 0000:00:1c.2: MEM window: 0xd0200000-0xd02fffff pci 0000:00:1c.2: PREFETCH window: 0x0000007fc00000-0x0000007fdfffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.3: IO window: 0x3000-0x3fff pci 0000:00:1c.3: MEM window: 0xd0300000-0xd03fffff pci 0000:00:1c.3: PREFETCH window: 0x0000007fe00000-0x0000007fffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 pci 0000:00:1e.0: IO window: 0xd000-0xdfff pci 0000:00:1e.0: MEM window: 0xd0400000-0xd04fffff pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x800fffff xen: registering gsi 16 triggering 0 polarity 1 alloc irq_desc for 16 on node 0 alloc kstat_irqs on node 0 xen: --> irq=16 pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:01:00.0: setting latency timer to 64 xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 xen: registering gsi 18 triggering 0 polarity 1 alloc irq_desc for 18 on node 0 alloc kstat_irqs on node 0 xen: --> irq=18 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 xen: registering gsi 19 triggering 0 polarity 1 alloc irq_desc for 19 on node 0 alloc kstat_irqs on node 0 xen: --> irq=19 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd01fffff] pci_bus 0000:01: resource 2 pref mem [0x7f700000-0x7f7fffff] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] pci_bus 0000:02: resource 1 mem: [0xd0000000-0xd00fffff] pci_bus 0000:02: resource 2 pref mem [0x7f700000-0x7f7fffff] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff] pci_bus 0000:03: resource 1 mem: [0x7f800000-0x7f9fffff] pci_bus 0000:03: resource 2 pref mem [0x7fa00000-0x7fbfffff] pci_bus 0000:04: resource 0 io: [0x2000-0x2fff] pci_bus 0000:04: resource 1 mem: [0xd0200000-0xd02fffff] pci_bus 0000:04: resource 2 pref mem [0x7fc00000-0x7fdfffff] pci_bus 0000:05: resource 0 io: [0x3000-0x3fff] pci_bus 0000:05: resource 1 mem: [0xd0300000-0xd03fffff] pci_bus 0000:05: resource 2 pref mem [0x7fe00000-0x7fffffff] pci_bus 0000:06: resource 0 io: [0xd000-0xdfff] pci_bus 0000:06: resource 1 mem: [0xd0400000-0xd04fffff] pci_bus 0000:06: resource 2 pref mem [0x80000000-0x800fffff] pci_bus 0000:06: resource 3 io: [0x00-0xffff] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 8041k freed PCI-DMA: Using software bounce buffering for IO (SWIOTLB) DMA: Placing 64MB software IO TLB between c3cdd000 - c7cdd000 DMA: software IO TLB at phys 0x3cdd000 - 0x7cdd000 apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1295075366.261:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 3246 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) alloc irq_desc for 753 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:01.0: setting latency timer to 64 alloc irq_desc for 752 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 751 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.2: setting latency timer to 64 alloc irq_desc for 750 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.3: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Event-channel device installed. registering netback alloc irq_desc for 749 on node -1 alloc kstat_irqs on node -1 Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel E7221 (i915) Chipset agpgart-intel 0000:00:00.0: can't get memory for scratch page agpgart-intel 0000:00:00.0: agp_backend_initialize() failed agpgart-intel: probe of 0000:00:00.0 failed with error -12 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module loaded ahci 0000:00:1f.2: version 3.0 xen: registering gsi 19 triggering 0 polarity 1 xen_allocate_pirq: returning irq 19 for gsi 19 xen: --> irq=19 Already setup the GSI :19 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl IDE mode ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xd05c3000 port 0xd05c3100 irq 19 ata2: SATA max UDMA/133 abar m1024@0xd05c3000 port 0xd05c3180 irq 19 ata3: SATA max UDMA/133 abar m1024@0xd05c3000 port 0xd05c3200 irq 19 ata4: SATA max UDMA/133 abar m1024@0xd05c3000 port 0xd05c3280 irq 19 ata_piix 0000:00:1f.1: version 2.13 xen: registering gsi 18 triggering 0 polarity 1 xen_allocate_pirq: returning irq 18 for gsi 18 xen: --> irq=18 Already setup the GSI :18 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi4 : ata_piix scsi5 : ata_piix ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver xen: registering gsi 23 triggering 0 polarity 1 alloc irq_desc for 23 on node 0 alloc kstat_irqs on node 0 xen: --> irq=23 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd05c0000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32.27 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver xen: registering gsi 23 triggering 0 polarity 1 xen_allocate_pirq: returning irq 23 for gsi 23 xen: --> irq=23 Already setup the GSI :23 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32.27 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected xen: registering gsi 19 triggering 0 polarity 1 xen_allocate_pirq: returning irq 19 for gsi 19 xen: --> irq=19 Already setup the GSI :19 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32.27 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected xen: registering gsi 18 triggering 0 polarity 1 xen_allocate_pirq: returning irq 18 for gsi 18 xen: --> irq=18 Already setup the GSI :18 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32.27 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32.27 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected PNP: No PS/2 controller found. Probing ports directly. ata5.00: ATA-7: ST3160812A, 3.AAJ, max UDMA/100 ata5.00: 312581808 sectors, multi 16: LBA48 ata5.00: configured for UDMA/100 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 242 bytes nvram device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 11:451:167 acpi PNP0000:00: hash matches scsi 4:0:0:0: Direct-Access ATA ST3160812A 3.AA PQ: 0 ANSI: 5 sd 4:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 4:0:0:0: Attached scsi generic sg0 type 0 sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 4:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 472k freed Write protecting the kernel text: 2996k Write protecting the kernel read-only data: 1424k usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: New USB device found, idVendor=046d, idProduct=c018 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: Logitech USB Optical Mouse usb 2-1: Manufacturer: Logitech usb 2-1: configuration #1 chosen from 1 choice input: Logitech Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2 generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0 usb 2-2: new low speed USB device using uhci_hcd and address 3 usb 2-2: New USB device found, idVendor=03f0, idProduct=0024 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: HP Basic USB Keyboard usb 2-2: Manufacturer: CHICONY usb 2-2: configuration #1 chosen from 1 choice input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3 generic-usb 0003:03F0:0024.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-2/input0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1295075369.650:2): selinux=0 auid=4294967295 ses=4294967295 udev: starting version 145 tg3.c:v3.102 (September 1, 2009) xen: registering gsi 18 triggering 0 polarity 1 xen_allocate_pirq: returning irq 18 for gsi 18 xen: --> irq=18 Already setup the GSI :18 tg3 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 tg3 0000:04:00.0: setting latency timer to 64 eth0: Tigon3 [partno(BCM95721) rev 4101] (PCI Express) MAC address 00:30:48:81:eb:8e eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1]) eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] xen: registering gsi 19 triggering 0 polarity 1 xen_allocate_pirq: returning irq 19 for gsi 19 xen: --> irq=19 Already setup the GSI :19 tg3 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 tg3 0000:05:00.0: setting latency timer to 64 eth1: Tigon3 [partno(BCM95721) rev 4101] (PCI Express) MAC address 00:30:48:81:eb:8f eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1]) eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] eth1: dma_rwctrl[76180000] dma_mask[64-bit] Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] intel_rng: FWH not detected sata_promise 0000:02:01.0: version 2.12 xen: registering gsi 24 triggering 0 polarity 1 alloc irq_desc for 24 on node 0 alloc kstat_irqs on node 0 xen: --> irq=24 sata_promise 0000:02:01.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 scsi6 : sata_promise scsi7 : sata_promise scsi8 : sata_promise scsi9 : sata_promise ata7: SATA max UDMA/133 mmio m4096@0xd0030000 ata 0xd0030380 irq 24 ata8: SATA max UDMA/133 mmio m4096@0xd0030000 ata 0xd0030280 irq 24 ata9: SATA max UDMA/133 mmio m4096@0xd0030000 ata 0xd0030200 irq 24 ata10: SATA max UDMA/133 mmio m4096@0xd0030000 ata 0xd0030300 irq 24 pata_pdc2027x 0000:06:01.0: version 1.0 xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 pata_pdc2027x 0000:06:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pata_pdc2027x 0000:06:01.0: PLL input clock 16652 kHz ata7: SATA link down (SStatus 0 SControl 300) scsi10 : pata_pdc2027x scsi11 : pata_pdc2027x ata11: PATA max UDMA/133 mmio m16384@0xd0410000 cmd 0xd04117c0 irq 16 ata12: PATA max UDMA/133 mmio m16384@0xd0410000 cmd 0xd04115c0 irq 16 input: PC Speaker as /devices/platform/pcspkr/input/input4 ppdev: user-space parallel port driver ata8: SATA link down (SStatus 0 SControl 300) ata9: SATA link down (SStatus 0 SControl 300) ata10: SATA link down (SStatus 0 SControl 300) xen: registering gsi 19 triggering 0 polarity 1 xen_allocate_pirq: returning irq 19 for gsi 19 xen: --> irq=19 Already setup the GSI :19 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 device-mapper: multipath: version 1.1.0 loaded EXT3 FS on dm-1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with writeback data mode. Adding 4194296k swap on /dev/mapper/vg_dom0test-lv00. Priority:-1 extents:1 across:4194296k NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): eth1: link is not ready alloc irq_desc for 748 on node -1 alloc kstat_irqs on node -1 alloc irq_desc for 747 on node -1 alloc kstat_irqs on node -1 XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Bridge firewalling registered virbr0: starting userspace STP failed, starting kernel STP eth0: no IPv6 routers present